Camshaft, 224-280 : GX200, 6.5 OHV, & 212 Predator ( Designed for 58mm Cranks and Higher)
$
$115.00
Savings: $
Product Code: 200cam-280
King of mid-range | Great for mini bikes and marine application
Designed for a 58mm Crank
With approximately .280 lift and 220 duration (at .050), this cam works well on both stock and modified motors and produces lots of low end torque. One of the best all-around cams we offer. Honda blocks may need clearance to install. 26lb springs required. Bored or aftermarket carb needed.
280-0611: Good torque cam with excellent power. 7500rpm. 10.5-to-1 compression or more. 26+lb springs required.
280-0211: THE ULTIMATE TORQUE CAM. Special grind for marine and winch boarding applications. Extreme torque. Designed for 2000-5500rpm. 11-to-1 or lower compression ratio required. 26+lb springs required.
Note: Block or crankshaft may require clearance to clear camshaft lobes.
