Used To Connect Brake Cable To Brake Band.

These Are Sold As Each (1)
Rotor bolts For The Hurricane And Mega Moto Pro

Used To Adjust Tension On Brake And Throttle Cables. 8MM fitting.

Fits our High Quality Left Side Brake Lever With Adjuster and Full Size Right Side Brake Lever

• 3/8" Large Barrel
• 60" inner cable
• 55" outer casing
• Heavy-duty universal cable
• Barrel on one end

Fits our Doodle Bug Left Spring Loaded Brake Lever 7/8 ( Adjustable), and Vintage Small Left Cast Brake Lever.
All Brake Cable ends can be cut for Custom Applications as needed.Can be used with or without holder.Great For Motovox, Doodle Bug, Monster Moto Etc.

• 1/4" Small BMX Barrel
• 60" conduit
• With Metal Holder

Brake puck/Pad used in calipers 9597 and 9598 (common Manco, Fox) Manco Mechanical Brake Caliper. If you need the puck that is adheared to the caliper suggest you replace the caliper. This is for one brake puck.

Fits our High Quality Left Side Brake Lever With Adjuster and Full Size Right Side Brake Lever
All Brake Cable ends can be cut for Custom Applications as needed.

• 3/8" Large Barrel
• 60" conduit
• 65" Inner Cable with a .370" barrel end
• 5/64 Inner Cable OD

Replacement Reservoir For Hydraulic Brake Master Cylider 150/250 Trailmaster, Hammer head

Forged Aluminum Cable Adjuster. Used to Adjust the slack from Brake/Throttle Cables. Also used to Adjusting Clutch Cables On  Honda Style levers.

Universal Brake Cable 56' With Clevis and Spring.

• Fits Fox and Rupp rear wheel
• 56" inner cable
• 51 1/4" outer casing
• Comes with U-clamp and spring

Universal Brake Cable 34' With Clevis and Spring.

• Fits Fox and Rupp rear wheel
• 34" inner cable
• 30' outer casing
• Comes with U-clamp and spring

Custom Color Sleeve Brake Cables. Comes in 6 Colors ( Choose From options Above)
Fits our Doodle Bug Left Spring Loaded Brake Lever 7/8 ( Adjustable), and Vintage Small Left Cast Brake Lever.
All Brake Cable ends can be cut for Custom Applications as needed. Can be used with or without holder. Great For Motovox, Doodle Bug, Monster Moto Etc.

• 1/4" Small BMX Barrel
• 60" conduit
• With Metal Holder

• 2" Wide
• 4 1/8" Tall
• 3 1/2" Between ears

Rear Brake Pads for the MB200, Hurricane, Mega Moto Pro

4-1/2" Drum has 6 holes on a 5-1/4" bolt circle. Machined "OD" for band brakes.
All drums have 3 sets of moutning holes: 3 & 4 hole on a 3.75" diameter bolt circle
and a 4 hole on a 3.228" bolt circle to match the Azusa Mini-Hub.

• Machined OD for Band Brake Use
• 2-1/8" Center Bore
• Fits Our 4.5" Brake Band

Fits Coleman, MB200 W/Drum Brake, Baja Warrior Left All Steel Brake lever With Adjuster. Will Work on 7/8 Handle Bars and 3/8 Brake Cable Barrels.
-Picture For Reference only-
( Silver Only)

This Is A Rear Rotor For Trailmaster MB200 And Hurricane Mini Bikes. ( Makes A great Universal Rotor As Well)

• 7 1/4 Inch Diameter
• 4 holes 3/8"
• 3.150" Bolt Circle
• 4 1/25 Bore Size

Rear Brake Cable for MB200, Coleman and Dah Boss. Also Compatible With Baja Warrior Left All Steel Brake lever With Adjuster 7/8 This is The Longer 72" cable.  72 3/4" O.A.L.

180 mm Rear Brake Rotor Fits Baja, Doodle Bug, DB30, Motovox. And Monster Moto

34" Brake Hose. 150cc Driver side front ( Note:Pictures Are For Reference Only )
Fits:

• Trailmaster / Hammerhead:6.000.089
  
• Carter:652-0015
  
• Manco / AmericanSportworks:14128

• Inner wire length 53", housing length 43"
• Housing is threaded 2" on each end to allow for adjustment
• 2 adjustment nuts on each end
• Inner wire travel is 7", eyelet on both ends

Our Most Popular Band Brake For Mini Bikes. Direct Replacement For Our Brake Band Kit. Commonly Found On Ruttmans and Lil' Indians. Comes With Stud And Nuts.

High Quality 8" Brake Drum Rotor. Great for 1 Inch Live Axles. Is Also compatible with the Yerf-Dog Spiderbox GX150 Go-Kart. Works great with Sprocket / Brake Hub with 3-1/8" Bolt Pattern

• (4) 5/16" bolt holes on a 3-1/8" bolt circle
  
• .16" Thick

43" Brake Hose. 150cc Driver side front ( Note:Pictures Are For Reference Only )
Fits:

• TrailMaster / Hammerhead:6.000.090
• Carter:652-0016
• Manco / AmericanSportworks:14129

69" Rear Brake Hose for Mid and 80T go karts.