|
|
|
|
|
|
|
|
|
|
|
These Are The Motor Plate Mounting Hardware for The 460cc And 390cc Motor/Engine Mounting Plates. These Are Made From Hardened Grade 5 Steel Bolts.
|
This Topper Plate Is Designed To Go Over Existing Engine Plate. Light Duty Steel Plate. Saves you the Trouble Of Grinding Your Old Plate Off. 5/64 Thick, .08. Exact Replacement for A Harrison Mini Bike. Will Fit Standard Small Block Engines Footprint 3-7 Horsepower Engines.
|
Engine Mounting Plate - 5" x 12" Flat, 11 Gauge Steel Engine Mounting Plate - 5" x 12" x 0.137 (9/64") 11 gauge with slotted mounting holes. Product Specs: - Flat Engine Mounting Plate
- 12" x 5"
- Heavy Gauge Steel
- Slotted Mounting Holes
- Center to Center Distance: 2 3/4" x 5"
- Fits all popular Small Block Engines 3HP-7HP
- Fits Briggs & Stratton
- Tecumseh
- Honda, Honda Clone
- Predator 212cc
|
|
|
|
|
|
|
|
|
|
|
|
|
1" engine riser / spacer, includes 2 1" square and hardware to mount. Fits 4-7 hp engines with 3 1/8" center spacing. Used when installing torque converters on Coleman or other Minibikes.
|
Engine Mounting Plate, 5" x 12", Flat, Heavy 9 Gauge Steel with slotted mounting holes. Fits all popular Small Block engines 3HP-6.5HP - Fits Briggs & Stratton
- Tecumseh, Honda
- Honda Clone
- Predator 212cc
|
This is an Engine Mounting Plate, 8-3/4" x 7-3/4" with lips.
- It is weldable steel component of one or more Azusa-design assemblies.
|
|
|
|
|
|
|
|
|
|
|
|
|
- 3/8-24 x 11 solid tie rod, adjustable & trimmable. Extra-long threads. Plated steel.
- 3/8-24 deluxe rod end bearings
- 3/8-24 jam nuts
|
- 3/8-24 x 13 Solid Tie Rod, Adjustable & Trimmable. Extra-Long threads. Plated Steel.
- 3/8-24 Deluxe Rod End Bearings
- 3/8-24 Jam Nuts
|
- 3/8 24 x 17 solid tie rod, adjustable & trimmable. Extra-long threads. Plated steel.
- 3/8-24 deluxe rod end bearings
- 3/8-24 jam nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
Made To Exact Specs For Ruttman Mini Bike But Heavier Gauge Steel.
- Fits Most Common Small Block Engine Footprint Found on 3-7 HP.
- 9/64 Thick
- 9/25 X 7 inches
|
Heavy Duty Steel Engine Plate 11/64 Thick, .170. Exact Replacement for A Harrison Mini Bike. Thicker Plate For Performance Applications. Will Fit Standard Small Block Engines Footprint 3-7 Horsepower Engines.
|
The Mega Moto 80/105 Adapter Plate will allow you to mount a Predator 212/Tillotson 212/Clone 196 Engine to your Mega Moto 80/105/E1000 frame. This plate is tall enough to be able to use a 30 series Torque Converter Kit without any extra modifications to your bike. Because of this height, you will need to relocate gas tank and run a Stage 1 Kit to fit in your frame. No hardware included. Allows you to bolt on a Predator/Tillotson/Honda Clone engine to Mega Moto 80/105/E1000 frame Slotted holes for direct chain alignment with a centrifugal clutch Extra set of holes for our Fully Adjustable Motor Plate ( STDZZSBPLATE). Having both plates will allow you to run a 30 Series Torque Converter Kit.*******Will have to relocate gas tank for clearance******* Hardware not included (you will need 5/16" nuts and bolts)
|
|
|
|
|
|
|
|
|
|
|
|
|
10" Steering Wheel for Go-Karts. This wheel has a 1/2" diameter center hole, (3) 1/4" mounting holes, and 1-3/8" center to center (outside holes).
- Size: 1/2" center hole, (3) 1/4" mounting holes, 1-3/8" center to center outside holes
- 2-1/4" deep
|
Heavy Duty Steal Big block Engine Plate For GX240, GX270, GX390, Predator 301, And, 420
- Fits Most Common Big Block Engine Footprints
- 11/64 Thick
- 12 X 12 inches
|
Allows for an easy fool proof way to mount larger 4 to 7.5 HP engines in a Doodle Bug, Baja, Motovox, most Mini Bikes and other custom applications. Allows for easy chain alignment and adjustment. Does not mount to original small engine bolt pattern. 4 new 5/16 holes must be drilled.
- The mount allows for side to side engine adjustment for precise sprocket alignment. as well as front to rear adjustment for chain tension
- This Mount system works with engines that have the industry standard 6 3/8" by 3" inch mount spacing
- FIts the Honda GX 120-200, 6.5 Chinese OHVs, Predator 212, Briggs, Kohler, Subaru and other brands in 4-7.5 hp range.
- Includes Mounting Hardware Kit
|
|
|
|
|
|
|
|
|
|
|
GX390 Engine/Motor Plate allows for an easy fool proof way to mount larger 9 hp and up (GX270, GX390, 420 CC) engines in a Mini-Bike, Doodle Bug, Baja , Motovox and many other custom applications. The mount allows for left to right engine adjustment for precise sprocket alignment. as well as front to rear adjustments for chain tension.This Mount system works with engines that have the industry standard LARGE 7 5/8" mount spacing .
- FIts the Honda GX 240 to GX390, 11/13/15 Chinese OHVs, HF Predator 420, Large Briggs, and other brands in 9 HP and up range that use 7 5/8" Bolt Spacing
- Will not fit the 460cc and 16/18cc engines that use the 8 1/2" spacing
- Plate is made of 3/4" Aluminum to prevent flexing/
- Mounting bolts not included, but uses standard 5/16" to attach plate to frame and 3/8" to attach engine to plate.
|
Custom Engine/Motor Plates allows for an easy fool proof way to mount larger 460cc Chinese OHV and 16/18hp engines in a Mini-Bike, Doodle Bug, Baja , Motovox and many other custom applications. The mount allows for left to right engine adjustment for precise sprocket alignment. as well as front to rear adjustments for chain tension.This Mount system works with engines that have the industry standard LARGE mount spacing.
- Fits 460cc & 16/18 Chinese OHVs, Some HF Predator 420 and other motors using a 8 1/2" Bolt Spacing.
- Will not fit GX390 and 8/9hp engines using 7 5/8" Spacing
- Plate is made of 3/4" Aluminum to prevent flexing/
- Mounting bolts not included, but uses standard 5/16" to attach plate to frame and 3/8" to attach engine to plate.
|
|
|