|
|
|
|
|
|
|
|
|
|
|
External Ring for Weight for the Blaze Clutches
|
Bowed External Ring for the Sprocket. Fits Inferno Fury or Blaze Clutch.
|
Hillard Clutch Bushing Snap Ring for All Hilliard Extreme Clutches.
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick Change Springs Allow For Fast Adjustment Of RPM Engagement Speeds. Made For The Hilliard Extreme Duty Clutch Line.
!!!! NOTE: These Sold Individually. You will need 4 per Clutch !!!! Engagement Speeds: - Black = 3000 RPM
- White = 2300 RPM
- Yellow = 2000 RPM
- Orange = 1800 RP
|
Light Weigth for the Blaze clutch. Will require Clips ( #8444-9U-005)
|
Fits Inferno Blaze clutches from Hilliard
|
|
|
|
|
|
|
|
|
|
|
|
|
These shoes fit Inferno Fury clutches from Hilliard
|
!! Sold Individually !! *Hillard Inferno Flame Takes Four Shoes To A Clutch* This Offset Shoe Is Made To Fit The Hillard Inferno Flame Clutches. These Shoes Are Slotted For Cooling And Heat Dissapation. They Are Steam Treated To Remove All Of The Oil From Them To Prevent Any Full Load Slippage Under High-Heat Conditions.
|
Replacement 3/4" Bushing with snap ring groove for the Hilliard clutch
- Also reference as Hilliard 8444-9U-016
- Designed to work with Hilliard Extreme Duty 3/4" Bore Clutches
- Bushing may or May Not come with Groove For Clip. Both Will Work!
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement needle bearing and race assembly for the new Inferno clutch from Hilliard THIS PRODUCT IS FOR THE NEW INFERNO CLUTCH DESIGN AND NOT COMPATIBLE WITH CLUTCHES THAT UTILIZE THE BRONZE BUSHING!
|
|
Bushing: 1-1/4" x 1-1/2" x 1" Replacement bushing for Hilliard Extreme Duty 1" Bore Clutches
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: THIS SPROCKET IS FOR THE NEW DESIGN OF CLUTCH FROM HILLIARD. They ARE NOT COMPATIBLE WITH CLUTCHES THAT UTILIZE THE BRONZE BUSHING!
 Product Specs:
- #35 Chain Replacement Sprockets
- Choice of 12T-16T
- For the new style Inferno Racing Clutches from Hilliard.
- Sprocket only (does not include the needle bearing)
|
Complete Replacement Internal Hilliard Clutch Assembly Includes:
|
Stamped racing drum conversion kit for a Bully / SMC / Tomar drivers with an Inferno FURY or BLAZE Clutch.
Includes:
- Stamped Racing Drum
- Flat Washer
- Hub Spacers (6)
- Hardened Bearing Race
- (Sprocket, snap ring & screw not included in kit)
- Not compatible with the Inferno Fire clutch due to the drum diameter.
|
|
|
|
|
|
|
|
|
|
|
Best 420 Chain Performance Clutch on the Market. This Clutch Features Machined Drum, Hardened Core, Oil Impregnated Shoes For Smooth Engagement. Comes with A Set Of White Springs And Black Springs. Designed Specifically For Big Tire Mini Bikes That come With 420 Chains. Made For Baja Warrior, MB200, Puma, Coleman, Mega Moto. Comes in 10 and tooth (Needle Bearing) For Extra Top End. Can Be Used on 41, 420, And 40 Chains. ( If You Are Taking Off Torque Converter To Run Straight Chain, We recommend Using Our 60 Tooth Sprocket Baja, Coleman, MB200, 420 Sprocket 46-66 Tooth Sprocket)
|
Best 35 Chain Performance Drum Style Clutch on the Market. This Clutch Features Machined Drum, Hardened Core, Oil Impregnated Shoes For Smooth Engagement. Comes with A Set Of White Springs And Black Springs. This Clutch Uses Bully Driver Sprockets ( Choose From Options Above)
|
|