|
|
|
|
|
|
|
|
|
|
|
|
|
|
Best Quality Stock Carb Replacement for all 6.5 Chinese OHVs. Has a larger Main Bore And Venture Porting
|
Aftermarket Stock Replacement Carburetor for All GX390s and 420cc Predators *** Fits most 13/15hp Chinese OHV Honda style motors ***
|
ALL Our 22 Mikuni Style Carbs Now Come Fully Jetted With A 15 Pilot Jet And 130 Main! Disregard what is stamped on carb ( Unlike E-bay or Amazon!)
Designed in Japan!
**********NOTE: These Carbs Are Still made in The Mikuni Factory But may say "GPS" On Them.**********
It fits most Chinese 70-150cc Dirt Bikes, ATVs & Go Karts, Please check pictures and specifications for compatibility
NOTE: THE KEY TO THE PERFORMANCE OF THIS CARBURETOR IS OUR IN HOUSE PERFORMANCE TECH'S ADJUST AND RE JET EVERY CARBURETOR TO OUR EXACTING STANDARDS.- ( NOT FOUND ANYWHERE ELSE) - Intake Inside Diameter: 0.989''
- Air Filter Mount Inside Diameter: 1.37''
- Air Filter Mount Outside Diameter: 1.494''
- Increase the horsepower and airflow for your bike, and have more fun with the power at your finger tips
- Includes a #15 Upgraded Jet Installed
- Main Jet is drilled to 130
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lippo 26mm Carburetor. Great bolt on Carburetor for a Tecumseh 10hp HM100 Engine. This Carb has been Widely Used in the Detroit Metro Area Over the Years.
|
New Race Ready 28mm Bore carb that has dyno proven to provide excellent power, throttle response, and smoothness on Honda, Predator, and “Clone” applications. This is the best “Bolt On” carb for 18+ hp applications. - 28mm Bore
- Chromed round-flat throttle valve for excellent response and more flow at high RPM.
- Uses standard round slide Mikuni main Jets
- Uses Kehien 21 Series Pilot Jets
- Black crinkle finish
- Fits our flat slide manifolds (hose required)
- 135 Main & stock pilot recommend for most applications
This is an excellent “Bolt On” carb and carb kit. For out of the box applications, it is proven to be the best we have. However, compared to the flat slides it does NOT have the tuning capability, Note: Mikuni Pilot jets will not fit. Requires Kehien 21 Series
|
This is A OEM Genuine Mikuni VM22 made in Japan!! NOT A KNOCK OFF! - Spigot Mount ID: 22mm
- Main Jet: 4/042-100
- Pilot Jet: VM22/210-30
- Needle Jet: N-8 (257)
- Throttle Valve: 2.0 (VM26/21)
- Main Air Jet: 2.5 body
- Needle Valve: 2.0 (VM26/26)
- Carburetors come complete with lever chokes and standard jetting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This FLAT SLIDE SMOOTHBORE design cuts down the turbulence in the bore-throat to increase air flow efficiency. Smoothbore design eliminates various orifices and obstacles in the carb throat which cuts down the turbulence to increase air flow efficiency Increases velocity and horsepower Uses standard VM pilot, main and air jets Instantaneous response Comes with built-in location for power jet
|
( Note: This is A Gas Carb!) This FLAT SLIDE SMOOTH BORE design cuts down the turbulence in the bore-throat to increase air flow efficiency. Smooth bore design eliminates various orifices and obstacles in the carb throat which cuts down the turbulence to increase air flow efficiency Increases velocity and horsepower Uses standard VM pilot, main and air jets Instantaneous response Comes with built-in location for power jet.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIKUNI AMERICAN CORPORATION TM FLAT SLIDE CARBURETOR 34MMCarburetor For Mikuni TM34 TM 34mm 34 mm Flat Slide Smoothbore Carb TM34-2
|
MIKUNI AMERICAN CORPORATION TM FLAT SLIDE CARBURETOR 32MM
|
MIKUNI AMERICAN CORPORATION TM FLAT SLIDE CARBURETOR 36MM Carburetor
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIKUNI AMERICAN CORPORATION TM FLAT SLIDE CARBURETOR 38MM Carburetor
|
( Note: This is A Methanol Carb!) This FLAT SLIDE SMOOTH BORE design cuts down the turbulence in the bore-throat to increase air flow efficiency. Smooth bore design eliminates various orifices and obstacles in the carb throat which cuts down the turbulence to increase air flow efficiency Increases velocity and horsepower Uses standard VM pilot, main and air jets Instantaneous response Comes with built-in location for power jet.
|
Mikuni Pumper Carb Series Flat Slide Carburetor - 33mm
This FLAT SLIDE SMOOTH BORE design cuts down the turbulence in the bore-throat to increase air flow efficiency. Smoothbore design eliminates various orifices and obstacles in the carb throat which cuts down the turbulence to increase air flow efficiency. - Increases velocity and horsepower
- Uses standard VM pilot, main and air jets
- Instantaneous response
- Comes with built-in location for power jet
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Best Gas Carb For Serious GX200 and Predator Open Motors.
BEST GAS PERFORMANCE FOR THE MONEY! LARGER CAM AND HEAD WORK REQUIRED. Our Kit Comes With Authentic Mikuni Throttle Cable And Jets (Something Our Competitors Don't Do) . These Are Authentic Mikuni Carbs!
Kit includes:
- Machined Intake Manifold / Adapter With Pulse Fitting
- Gasket
- 52" Carb Cable ( 52" Works With Most Carb Applications)
- Air Filter ( Style May Be Different From Item Pictured)
- Air Filter Adapter / Velocity Stack
- Hose & Clamps.
- Jet Kit (Varies)
Note: This a Flat Slide Carb Which Is Far Superior To The Cheap Round Slide Mikuni. Some Tuning And / Or Jet Changes May Be Required.
*Filter Should Be Treated With Oil, Especially In Dirt Applications.
*Oil NOT Included Interlube Foam Filter Oil 500Ml
*Picture For Reference Only, Actual Parts May Vary From Picture (Ex. Color Of Hose Or Manifold)
|
MIKUNI FLAT SLIDE CARBURETOR 40mm With A Accelerator Pump.
|
MIKUNI AMERICAN CORPORATION TM FLAT SLIDE CARBURETOR 36MM Carburetor With Pumper
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mikuni Pumper Carb Series Flat Slide Carburetor Set Up For Methanol - 33mm
This FLAT SLIDE SMOOTH BORE design cuts down the turbulence in the bore-throat to increase air flow efficiency. Smoothbore design eliminates various orifices and obstacles in the carb throat which cuts down the turbulence to increase air flow efficiency. - Set Up To Run Methanol
- Increases velocity and horsepower
- Uses standard VM pilot, main and air jets
- Instantaneous response
- Comes with built-in location for power jet
|
33mm Pumper Methanol Mikuni Kit. Kit includes
- Methanol Carb
- Manifold/adapter
- Air Filter/velocity stack
- Air Filter
- Mounting Hose & Clamps
- Throttle Cable is not included
This a PUMPER Square Slide carb which is far superior to the 34mm Flat Slide Mikuni. BEST CARB FOR GX390s
|
|
|
