|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used To Connect Brake Cable To Brake Band.
|
These Are Sold As Each (1)
Rotor bolts For The Hurricane And Mega Moto Pro M8x20mm Screw Bolts Stainless Steel Disc Brake Rotor
|
Fits our High Quality Left Side Brake Lever With Adjuster and Full Size Right Side Brake Lever- 3/8" Large Barrel
- 60" inner cable
- 55" outer casing
- Heavy-duty universal cable
- Barrel on one end
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits our Doodle Bug Left Spring Loaded Brake Lever 7/8 ( Adjustable), and Vintage Small Left Cast Brake Lever.
All Brake Cable ends can be cut for Custom Applications as needed.Can be used with or without holder.Great For Motovox, Doodle Bug, Monster Moto Etc. - 1/4" Small BMX Barrel
- 60" conduit
- With Metal Holder
|
Brake puck/Pad used in calipers 9597 and 9598 (common Manco, Fox) Manco Mechanical Brake Caliper. If you need the puck that is adheared to the caliper suggest you replace the caliper. This is for one brake puck.
|
Fits our High Quality Left Side Brake Lever With Adjuster and Full Size Right Side Brake Lever
All Brake Cable ends can be cut for Custom Applications as needed. - 3/8" Large Barrel
- 60" conduit
- 65" Inner Cable with a .370" barrel end
- 5/64 Inner Cable OD
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement Reservoir For Hydraulic Brake Master Cylider 150/250 Trailmaster, Hammer head
|
Universal Brake Cable 56' With Clevis and Spring.
- Fits Fox and Rupp rear wheel
- 56" inner cable
- 51 1/4" outer casing
- Comes with U-clamp and spring
|
Universal Brake Cable 34" With Clevis and Spring.
- Fits Fox and Rupp rear wheel
- 34" inner cable
- 30' outer casing
- Comes with U-clamp and spring
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Custom Color Sleeve Brake Cables. Comes in 6 Colors ( Choose From options Above)
Fits our Doodle Bug Left Spring Loaded Brake Lever 7/8 ( Adjustable), and Vintage Small Left Cast Brake Lever.
All Brake Cable ends can be cut for Custom Applications as needed. Can be used with or without holder. Great For Motovox, Doodle Bug, Monster Moto Etc. - 1/4" Small BMX Barrel
- 60" conduit
- With Metal Holder
|
Fits Studz Brake Band Part #STDZBRAKEBAND And 4-3/16" Band Brakes. Four 5/16" holes on 2 13/16" circleFour 3/8" holes on 2 7/8" circle4 1/4" OD x 1" HT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Generic Caliper Bracket used with manual caliper #9597. Can be bolted or welded on to frame. Dimensions : - 2" Wide
- 4 1/8" Tall
- 3 1/2" Between ears
|
Trailmaster/MB200 Replacement Brake Lever for New Style With Hydraulic Brake
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4-1/2" Drum has 6 holes on a 5-1/4" bolt circle. Machined "OD" for band brakes.
All drums have 3 sets of moutning holes: 3 & 4 hole on a 3.75" diameter bolt circle
and a 4 hole on a 3.228" bolt circle to match the Azusa Mini-Hub.
- Machined OD for Band Brake Use
- 2-1/8" Center Bore
- Fits Our 4.5" Brake Band
|
Works on other brands of karts and some mini-bikes that use the mini caliper (TrailMaster and Hammerhead Minis, Baja.) Mounting holes are 2" centered.
Uses Brake Pads Disc Brake Pads for Mini Baja, Doodlebug, Trailmaster And DB30
Will not fit Monster Moto bikes without modifying the mounting bracket on the frame.Will Not Fit Motovox |
180 mm Rear Brake Rotor Fits Baja, Doodle Bug, DB30, Motovox. And Monster Moto
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
34" Brake Hose. 150cc Driver side front ( Note:Pictures Are For Reference Only )
Fits:
- Trailmaster / Hammerhead:6.000.089
- Carter:652-0015
- Manco / AmericanSportworks:14128
|
Heavy Duty Brake Cable: - Inner wire length 53", housing length 43"
- Housing is threaded 2" on each end to allow for adjustment
- 2 adjustment nuts on each end
- Inner wire travel is 7", eyelet on both ends
|
Carter 5" Brake Band
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4-1/2" Band Brake. Steel Band, 2 Piece bonded brake lining, steel brake pin with cable hole. Band width 7/8"
|
This Is Our Most Popular Brake Band. Fits All 4' Drums And All 4" Clutches. Comes With Brake Pin.
|
Our Most Popular Band Brake For Mini Bikes. Direct Replacement For Our Brake Band Kit. Commonly Found On Ruttmans and Lil' Indians. Comes With Stud And Nuts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High Quality 8" Brake Drum Rotor. Great for 1 Inch Live Axles. Is Also compatible with the Yerf-Dog Spiderbox GX150 Go-Kart. Works great with Sprocket / Brake Hub with 3-1/8" Bolt Pattern Bolt Pattern:
Also fits the MB200 Hurricane rear rim - (4) 5/16" bolt holes on a 3-1/8" bolt circle
- .16" Thick
|
43" Brake Hose. 150cc Driver side front ( Note:Pictures Are For Reference Only )
Fits:
- TrailMaster / Hammerhead:6.000.090
- Carter:652-0016
- Manco / AmericanSportworks:14129
|
69" Rear Brake Hose for Mid and 80T go karts.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4"brake band with retainer clip. Most popular brake band on the market. Made Specifically for Manco Karts But works most other domestic made karts. Does not work with Carter go-karts that use a 5" band.
|
6" Disc. 7/8" Hexagon Center Slots in the breaks cuts down on the amount of heat it creates.
|
A Great Inexpensive Way To Stop Your Cart!
Popular mechanical brake caliper used on most domestic made go-karts. Works on live axle karts made by Manco, American Sportworks, Carter, Yerf-dog, Ken-bar, Bristers, Thunder kart, And Manco Big Cat Mini Bikes
|
|
|
