|
|
|
|
|
|
|
|
|
|
|
Price listed is each. Two seals with precision ground and hardened components for high speeds and heavy-duty applications.
- Most Common Bearing Wheel Bearing For Mini Bikes And Go Karts With 5/8 Axles
- Can Be Used For Multiple Applications
- 5/8″ ID X 1-3/8″ OD X 7/16″ Thick
|
Price listed is each. Inexpensive Utility Bearing For Low Speed Applications.
- Wheel Bearing For Mini Bikes With 5/8 Axles
- Can Be Used For Multiple Applications
- 5/8″ ID X 1-3/8″ OD X 7/16″ Thick
- Built In Retainer Ring
|
Price listed is each. Inexpensive Utility Bearing For Low Speed Applications.
- Wheel Bearing For Mini Bikes With 3/4 Axles
- Can Be Used For Multiple Applications
- 3/4" x 1 3/8" Thick
- Built In Retainer Ring
|
|
|
|
|
|
|
|
|
|
|
|
|
The price listed is each. Inexpensive Utility Bearing For Low Speed Applications.
- Wheel Bearing For 1/2 Axles
- Can Be Used For Multiple Applications
- 1/2X 1 3/8
- Built-In Retainer Ring
|
Price listed is each. With double seals, the precision ground and hardened components of precision sealed bearings are generally suited to high speeds and heavy-duty applications.
- Wheel Bearing For Mini Bikes and Go Karts With 5/8 Axles
- Can Be Used For Multiple Applications
- 5/8″ ID X 1-3/8″ OD X 7/16″ Thick
- Can be used for any use that does not require a retention ring
|
Sold Individually. Ground sealed bearings have a machined housing and a flanged outer race. Their unique inner race construction accommodates 3/4" ID x 1-3/8" OD x 7/16".
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner Front Hub Bearing on 150/250/300 Models As Well As Rear Axle Bearing For Mini Karts By Hammerhead and TrailMaster. 6204 2RS Sealed Bearing 17MM/40MM/12MM - Inner Diameter: 17MM
- Outer Diameter: 40MM
- Width: 12MM
|
Mid grade case bearing 6205
|
Free Spinning Axle Bearing, Standard, For 1″ Axles (non Locking) For Axle size 1'', OD - 2.04''
|
|
|
|
|
|
|
|
|
|
|
|
|
Axle Bearing, Standard, For 1″ Axles With Integral Locking Collar For Axle size 1'', OD - 2.04'' Integral locking collar- Hardened chrome steel.
|
Integral locking collar- Hardened chrome steel. Each axle uses two bearings. Used on Manco 7/8" hex axle Outer diameter 2"
|
Axle Bearing, Standard, For 1-1/4″ Axles With Integral Locking Collar For Axle size 1'', OD - 2.44'' Integral locking collar- Hardened chrome steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
Axle Bearing, Standard, For 3/4″ Axles With Integral Locking Collar 1.854" OD, 3/4" ID Integral locking collar- Hardened chrome steel.
|
A 10 pack Of ! Buy In Bulk And Save Two seals with precision ground and hardened components for high speeds and heavy-duty applications.
- Most Common Bearing Wheel Bearing For Mini Bikes And Go Karts With 5/8 Axles
- Can Be Used For Multiple Applications
- 5/8″ ID X 1-3/8″ OD X 7/16″ Thick
|
High Performance Heavy Duty Applications. Live Axle Bearing 1" With Mounting Flange. Much Stronger The The Thinner Plate version.
|
|
|
|
|
|
|
|
|
A Studz Racing Exclusive, The "Mini-Mag" Vintage Style 6" Aluminum Rim!! Modeled After The Old School Ruttman Rim, But With Some Studz Racing Flare. Our Rim Is Solid On The Back Side, Not Hollow, For Extra Durability. Or Rim Is Burnished To Give It That Polished Type Look, *Due To The Burnishing Process, Some Small Blemishes May Be Present." For Extra Bling, Rims Can Easily Be Polished For That Finished Look; Rims May Also Be Powder Coated Or Chromed. Most Important, Our Rims Not Only Look Great But They Run Very True At Approximately .002 Out!!
Includes:
- Two 5/8 Precision Bearings (3/4 Available Upon Request)
- 3/8 Grade 5 Hardware
- Two 6" x 1 3/4" Mini-Mag Wheel Halves
The "Mini-Mag" Rims Have Been Endorsed By: Sam Blackburn Of CWR Racing And Eric Swingle of Next Level Mini's. Sam Blackburn (CWR), Top Builder And Enthusiast In The Minibike World Says, "These Are The Nicest New 'Old School' Looking Rims Money Can Buy." Eric Swingle(Next Level Mini's), Local Enthusiast Says, "Best Rim's I've Ever Purchased Playa! Bolted Them On My Show Bike Build Right Out Of The Box!! !! LIMITED AVAILABILITY, GET YOURS WHILE SUPPLIES LAST !!
|
|