Home > Mini Bike & Go Kart Parts > Mini Bike Parts & Accessories > Suspension Parts > Springer Front End Components
Sort By:
Page of 1
Ruttman Spring Cups (Pair) Bottom Fork Plate (Doodlebug, Motovox,Monster Moto) Top Fork Plate ( 1/2" Top Hole)
Spring cup for 7/8" tubing, to be welded on. Inside diameter is 7/8" and outside diameter is 1-7/8". Use with our OMB_9124 spring! These are raw steel. The cups are NOS parts and may have some surface rust. Sold As A Pair Bottom Fork Plates For Front Springer Suspension. Top Hole Is 10mm. Two Bottom Fork Holes Are 7/8" Inch.
Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"
Top Fork Plate For Front Springer Suspension.
The Top Hole is 1/2"
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.
Top Fork Plate ( 10'mm Top Hole) Doodlebug, Motovox, And Monster Moto Bottom Fork Plate Harrison Ruttman Front Fork Springs
Top Fork Plate For Front Springer Suspension. Designed for Motovox, Doodlebug, And Monster Moto
The Top Hole is 10'MM
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.
Harrison Bottom Fork Plates For Front Springer Suspension. Top Hole Is 1/2". Two Bottom Fork Holes Are 7/8" Inch. Top hole can be drilled out to 5/8'mm or Can Be Modified And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"
Original NOS Ruttman Front Springs. Can be Used On Other Minibikes. Chrome plated Heavy Duty
7/8" Springer Fork Down Tube
7/8" Diameter Down Tube For Front Springer Forks. 19" Length. Can be Cut To Custom Length As Needed. Made For 5/8' Axle