• Bully Style Clutch Friction Disc Slotted (8-tab)
• 8 tag friction disc used on all models.
  
• Pricing and quantity is per disc. For example, if you have a 2 disc clutch you will need to order quantity of 2 discs.

Bully Type drivers in 12 to 20T, Made by WMS or other aftermarket manufacturer
3/4" Shaft Motors , #35 Chain
Fits most Bully and Noram (Cheetah) clutches using 3/4" shaft.
(note: 12T And 13t uses a bushing instead of bearing)

Bully Type drivers for #219 Chain
Fits most Bully and Noram (Cheetah) clutches using 3/4" shaft.

#35 Chain Clutch driver in 11 to 20T . Genuine Bully.
Fits most Bully & Noram clutches using 3/4" shaft

Studz Replacement Clutch Sprockets fit Buller, Jammer, SMC, NORAM, & Premier Clutches that accept interchangeable sprockets. Fits 41, 420 and 40 Chain. 10 Tooth is for Bushing Only! 11 Tooth For Needle Bearing Only.

Select 14 to 20T. #35 Chain, Fits Bully Turbos for 1" shafts

• Engagement: 2800 RPM
• Weights: 1 Bolt outer hole of every lever
• Springs: Black

Great clutch for stock to mild clones, GX200s, & Predators

• Engagement: 4000 RPM
• Weights: 1 Bolt outer hole of every lever
• Springs: Red
• Spring Height: .225"

Clutches DO NOT come with drivers!
Driver must be ordered separate.

This clutch is a 3 disc 6 spring clutch. It would be used on tracks requiring heavy clutch usage. Heavy clutch usage would be a result of either a heavy kart such as the Super Heavy or Champ class, or a track that is small and requires frequent engagement of the clutch throughout the race.

• Also for Hight HP applications (>20hp)
• Engagement: 4000 RPM
• Weights: 1 Bolt in outer hole of every lever
• Springs: Red
• Spring Height: .225"

Clutches DO NOT come with drivers!
Driver must be ordered separate.

Clutches DO NOT come with drivers!
Driver must be ordered separate.