|
|
|
|
|
|
|
|
|
|
|
GX Series Flange Bolt For GX 120, 160, 240, 270, & 390 Engines. Bolt Is 6mm x 8mm
|
Clutch Bolt Kit Gx200, Tillitson, Predator
- 5/16-24 x 3/4 bolt
- Flat washer
- Locking washer
|
Exhaust bolts for gx200, predator, tillison, ducar engines Sold as 1 individual bolt
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounting Kit for the Small Block Engines includes grade 5
- 4 5/16-18 x 1 1/2 Bolts
- 4 Locking Washers
- 4 Flat washers
- 4 5/16-18 Nuts
|
Axle Bolt 5/8 X 10 Grade 5 Hardened. Can Be Used As Both Front And Rear Axle
|
Made in The USA Not China Garbage. Kit Includes
- Six 6mm X 20mm Long Bolts Made With Black Hardened Steel Socket heads.
- Six 6mm Nuts
|
|
|
|
|
|
|
|
|
|
|
|
|
A Hardware mounting kit For The 22mm Mikuni Carb. Includes
- Intake Gasket
- 2 M6-1.0 x 20mm Bolts
- 2 M6-1.0 x 25mm Bolts
- 2 M6 Nuts
- 2 M6 Lock Washers
|
These Are The Motor Plate Mounting Hardware for The 460cc And 390cc Motor/Engine Mounting Plates. These Are Made From Hardened Grade 5 Steel Bolts.
|
Hardware mounting kit for the 24mm Mikuni Carb; Includes
- 2 M6-1.0 x 20mm Bolts
- 2 M6 Locking Washers
- Intake Gasket
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounting kit for the small block adapter plate
- 4 5/16-18 x 1 1/4 bolts
- 4 5/16-18 x 1 1/2 bolts
- 8 Locking Washers
- 8 Flat Washers
- 8 5/16-18 Nuts
|
Grade 8 small engine mount bolt kit
|
Stud Kit, Includes Head Studs, Washers & Nuts Fits GX160, GX200, Predators, and most Chinese OHV 6.5 Engines
|
|
|
|
|
|
|
|
|
|
|
|
|
Stud Kit, Includes Head Studs, Side Cover Studs, Washers & Nuts, Solid case Dowel Pins, Mandatory for all HP applications (Note. This kit uses studs only, no bolts)
|
Stud Kit, Includes Head Studs (B7 Steel), Side Cover Studs (316 SS), Washers & Nuts, Solid case Dowel Pins, Mandatory for all HP applications (Note. This kit uses studs only, no bolts)
|
Stud Kit, Includes Head Studs (B7 Steel), Side Cover Studs (316 SS), Washers & Nuts, Solid case Dowel Pins, Mandatory for all HP applications (Note. This kit uses studs only, no bolts)
|
|