- Use with #35 chain
- 5/8" OD x 12" L shaft
- 1 3/8" key
- Includes shaft, 13 tooth sprocket, 18 tooth sprocket, 2 bearing hangers, 2 precision bearings
|
- Use with #41/420 chain
- 3/4" OD x 14" L shaft
- 1 3/8" key
- Includes shaft, 10 tooth sprocket, 14 tooth sprocket, 2 bearing hangers, 2 precision bearings
|
Jackshaft Gear Reduction kit for Gokart or Minibike
Bolts onto engine and is fully self contained. In-line operation means the final drive sprocket is on the same side as the engine crankshaft, making it much easier if converting from a straight clutch
EASY TO INSTALL Jackshaft Gear Reduction kit for Gokart or Minibike bolts onto engine and is fully self contained. In-line operation means the final drive sprocket is on the same side as the engine crankshaft, making it much easier if converting from a straight clutch
In the past, many jackshaft kits required you to weld brackets onto your vehicle, install bearings and run the drive gear to the opposite side of the engine's crankshaft. This generally required re-locating the final drive sprocket making installation much more difficult
KIT INCLUDES: Billet Aluminum Engine Mounting Plate Jackshaft Boss 5/8" Jackshaft 2 Bearings Intermediate 17T for #35 chain or 14T for #41 chain Drive Sprocket 10T for #35 chain or 9T for #41 chain Clutch Spacer Machine Keys Set Screws Engine Mounting Bolts and Lock washersCrankshaft Bolt and Pilot Washer
Fits Honda GX160, 200s, 6.5 Racing Clones, and 212 Predators
Will not fit Honda GX270s or GX390s
|
|
