Home > Performance Engine Parts > Push Rods
Sort By:
Page of 1
Single Pushrod, Chrome Moly, 3/16" / 5.5mm, GX200, 6.5 Chinese OHV's, GX160, 212 Predators, Each Single Pushrod, Chrome Moly, 3/16" / 5.5mm, GX200, 6.5 Chinese OHV's, GX160, 212 Predators, Each

Heavy Duty Chrome Moly Push rods. Considerably stiffer than stock. Use with all HD springs. Capable of 10,000 RPM +

Our Price: $15.99
Pushrod, Chrome Moly, 1/4", GX240 to GX390, Each Pushrod, Chrome Moly, 1/4", GX240 to GX390, Each

Chrome Moly, 1/4" Pushrod For GX240 to GX390.
Heavy Duty Pushrod, Significantly Stronger Than Stock! For Use With All Heavy Duty Springs & Are Capable Of 10,000+ RPM
*ALL PUSHRODS ARE SOLD INDIVIDUALLY*
*MUST HAVE 2 PER MOTOR*

GX240/270S:

  • 5.720" Stock Length, Use With Stamped Rocker Arms
  • 5.260" (-.100): Use With Billet & Roller Rocker Arms
GX340/390,13/15HP Clones, 420 Predator OHV (Non-Hemi)
  • 6.540" Stock Length: Used With Stamped Rocker Arms
  • 6.440" (-.100): Use With Billet & Roller Rocker Arms
420 Hemi Predators
  • 6.900" (-.100): Use With Billet & roller Rocker Arms
  • 7.000" Stock Length: Used With Stamped Rocker Arms
Kit (Cut To Length)
*A Maximum Of .75 Can Be Cut Off Of Each Side For The Ends To Fit


*The Above Are Suggestions Only, Size May Vary Depending on Application*
Note: We Suggest Assembling the Motor First & Then Determining The Length of Pushrod You Need. Best Way Is To Grind A Stock Pushrod Until The Correct Geometry Is Reached, Measure It, And Then Order A Rod Closest To That Length.

Our Price: $16.99
Adjustable Pushrod tool - GX160 & GX200, 5.05 to 5.60" Adjustable Pushrod tool - GX160 & GX200, 5.05 to 5.60"

Adjustable Push Rod tool for checking for proper Pushrod length.
Adjust from 5.05" to 5.60"
Must be used with stock springs.
--------DO NOT RUN IN MOTOR!-----------

Our Price: $19.99
Adjustable Pushrod tool - GX270, 5.25" to 5.75" Adjustable Pushrod tool - GX270, 5.25" to 5.75"

Adjustable Push Rod tool for checking for proper Pushrod length.
Adjust from 5.25" to 5.75"
Must be used with stock springs.

--------DO NOT RUN IN MOTOR!-----------

Our Price: $23.99
Adjustable Pushrod tool - GX390, 6.25" to 6.75" Adjustable Pushrod tool - GX390, 6.25" to 6.75"

Adjustable Push Rod tool for checking for proper Pushrod length.
Adjust from 6.25" to 6.75"
Must be used with stock springs.
--------DO NOT RUN IN MOTOR!-----------

Our Price: $24.99
Adjustable Pushrod tool - 420, 6.25" to 6.75" Adjustable Pushrod tool - 420, 6.25" to 6.75"

Adjustable Push Rod tool for checking for proper Pushrod length.
Adjust from 6.75" to 7.25"
Must be used with stock springs.
--------DO NOT RUN IN MOTOR!-----------

Our Price: $24.99