Bottom Fork Plate (Doodlebug, Motovox,Monster Moto)
Bottom Fork Plates For Front Springer Suspension. Top Hole Is 10mm. Two Bottom Fork Holes Are 7/8" Inch.
Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"
Top Fork Plate ( 1/2" Top Hole)
Top Fork Plate For Front Springer Suspension.
The Top Hole is 1/2"
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.
Top Fork Plate ( 10'mm Top Hole) Doodlebug, Motovox, And Monster Moto
Top Fork Plate For Front Springer Suspension. Designed for Motovox, Doodlebug, And Monster Moto
The Top Hole is 10'MM
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.
Bottom Fork Plate Harrison
Harrison Bottom Fork Plates For Front Springer Suspension. Top Hole Is 1/2". Two Bottom Fork Holes Are 7/8" Inch. Top hole can be drilled out to 5/8'mm or Can Be Modified And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"
7/8" Springer Fork Down Tube
7/8" Diameter Down Tube For Front Springer Forks. 19" Length. Can be Cut To Custom Length As Needed. Made For 5/8' Axle