Brake Cable for CT100

Clutch Cover For The Coleman CT100 Mini Bike.

Approx. Dimensions:

• 10.5" Wide
• 6.75" Tall
• 3" Deep

Coleman CT 100U Rear Axle W/ Nut
M12 x 1.25 x 240mm

Chain Tensioner Pulley for the CT100 Minibikes.
Made of Metal
Comes with mounting bolt, washer. bearing, locking nut and pulley

CT100 Front Fender

CT 100 Rear Fender

Sold As A Pair!!! Foot Peg Assembly For Coleman CT100 Series Mini Bikes. Rubber Top And Cast Bottom.
Comes With:

• Right & Left Foot Peg
• Mounting Hardware

CT100 Brake Lever

Mechanical Rear Mini Caliber for the Coleman CT100 Mini Bike
Comes equipped with brake pads
Mounting holes are 2" from center to center

#35 Clutch and Chain Kit for the Coleman CT100 Minibikes.  Clutch fits 5/8" (16mm) crankshafts.  No set screws on clutch.  The chain is #35, 140 pitch, and comes with a #35 master link.

Coleman CC100x Forks.
This Includes JUST the Forks, bare otherwise.

NOTE: THERE ARE TWO DIFFERENT FORKS FOR THE CC100X, NEED TO MEASURE THE DISTANCE BETWEEN THE BRACKETS WHERE YOU MOUNT THE FORKS OR MEASURE THE LENGTH OF THE TUBE ON THE MAIN FRAME THAT THE KING PIN GOES THROUGH. THE DISTANCE ON THESE FORKS IS APPROX. 4-7/8.

12" seat for the Coleman CT100U Mini Bike

• 12" Long
• 6" Wide at Front
• 7" Wide at Back
• 2.5" Thick in the Front
• 4" Thick in the Back
• Will take 3mm Bolts (not included)
• Black Vinyl for easy clean ups
• Wide fitting with comfortable padding
• Easy installation
• Coleman Branded

Mini Bike seat for the Coleman CC100X Mini Bike.

• Approx. 16.5" long x 7.5" wide
• Vinyl top with hard plastic bottom
• 3 mounting holes for 10mm bolts (not included)
• Original Coleman CC100X Mini Bike Seat

6" Front Wheel For The Coleman CT100 Minibike. Comes With 6201 Bearings Pressed In The Wheel.

Dimensions:

• 6" Wheel
• 3.25" From Bead To Bead
• Approx. 7.25" From Outside Of Bearing To Outside Of Bearing