This is priced for one spindle.
NOTE- The 10549 / 6257 spindles are being reproduced out of a heavier material than the stock spindles.
The 10548 / 6256 spindles are the original spindles. These work together but are physically different appearance.
Manco, right (passenger) side for most 4xx model karts, axle length is 5".
10549 replacement for Manco 6257 same spindle with l" longer axle.
Manco, left (driver) side for most 4xx model karts, axle length is 5".
10548 replacement for Manco 6256 same spindle with 1" longer axle
Kingpin hole is 1/2"
Axle length is 5"
Axle diameter is 5/8"
Spindle shaft height- 2 3/8"
Strut Spindle for Midxrx/ 80T
80t strut. Used on Hammerhead 80T and TrailMaster Midxrx karts with 6.5hp engine. This strut does not work with the 80cc Hammerhead or TrailMaster Mid XRS models. Hardware not included.
TrailMaster Mid XRS uses the 2.100.055 / 057
2.000.055- right hand passenger side
2.000.057- left hand driver side
Our Price: $69.99
Sale Price: $59.99