Home > Performance Engine Parts > Hop Up Kits > 212 Predator
Sort By:
Page of 1
Stage 1 Performance Kit 212 Predator ( Non Hemi Only) Stage 1 Performance Kit 212 Predator ( Non Hemi Only)

A Basic kit for improving the performance of Predator Engines. Simple to install, you can expect significant performance increases.
  • Kit Includes:
  • Header ( Choice of 4, Note 3 Stage Is An Additional $5)
  • Main Jet
  • Pilot Jet
  • Filter
  • Filter Adapter
  • longer adapter stud
Additional Flywheel options available for additional cost.
Aluminum or Honda flywheel recommended. When the Governor is bypassed Or Removed, Stock flywheels are prone to failure and very DANGEROUS
Note: Pictures are for reference only. See description for actual content. Parts may be different than pictures depending on which options are selected.

Our Price: $67.00
Stage 2 Performance Kit For 212 Predator ( Non Hemi) Stage 2 Performance Kit For 212 Predator ( Non Hemi)

This Kit Is A MUST If You Are Removing The Governor From The Motor. Our Next Level Of Performance Kit. This Kit Gives You All Of The Basic From Our Level One But Adds More Durability And Performance.
This Kit Yields Over 10hp!
Kit Includes:

  • Header ( Choice of 4, Note 3 Stage Is An Additional $5)
  • Main Jet
  • Pilot Jet
  • Filter
  • Filter Adapter
  • CL1 High Torque Camshaft
  • ARC Billet Flywheel
  • Two 22 LB Springs
  • Side Cover Gasket
  • Valve Cover Gasket
  • NGK High Quality Spark Plug

Our Price: $260.00
Stage 3 Performance Kit For 212 Predator (non Hemi) Stage 3 Performance Kit For 212 Predator (non Hemi)

When You're Ready To Play With The Big Dogs But Don't want To Break The Bank. This Inclusive Kit Comes With Everything Needed To Double Horsepower And RPM Capability Of Your Motor To About 12hp.
NOTE:This Is Not A Drop In Kit And Requires Mechanical Knowledge! Some Engines May Require Additional machining and Clearance, Especially Hemi Motors.
Kit Includes:

  • Header ( Choice of 4, Note 3 Stage Is An Additional $5)
  • Mikuni Style 22 mm Complete Jetted Carb Kit With a 52' Custom Throttle Cable
  • "Hot Mod 2" Camshaft
  • Arc Billet Flywheel
  • Two 22 LB Springs
  • ARC Billet Rod
  • NGK Spark Plug
  • Side Cover Gasket
  • Head Gasket

Our Price: $410.00
Stage 4 Performance Kit For 212 Predator ( non Hemi) Stage 4 Performance Kit For 212 Predator ( non Hemi)

Now You're Getting Serious! Our Street And Strip Package! Performance And Reliability In One Inclusive Builders Kit. Full Valvetrain included, From The Stainless Valves And Molly Push Rods To The Guide Plate And Champion Rockers. 040 extended billet rod and .550 piston for higher compressionm .You Can Expect Between 14-16 HP Reliably ( Depending On Head Porting, Milling, Carb Options, Etc)
NOTE: This Is Not A Drop In Kit And Requires Mechanical Knowledge! Some Engines May Require Additional machining and Clearance, Especially Hemi Motors.
  • Header ( Choice of 4, Note 3 Stage Is An Additional $5)
  • Mikuni Style 22 mm Complete Jetted Carb Kit With a 52' Custom Throttle Cable
  • 274 - 06/07 Hardened Welded Cam
  • Arc Billet Flywheel
  • Two 26 LB Springs
  • 2.756 Cast Flat Top Piston
  • ARC Billet Rod .+ .040 over
  • 25mm/27mm Stainless Steel Valve 5 MM
  • Billet Aluminum Retainers And Locks 5MM
  • Chrome Molly Push Rods
  • Champion Rockers 1:1
  • Lash Caps 5MM
  • Side Cover Gasket
  • Valve Cover Gasket
  • NGK Spark Plug
  • Head Gasket
Note: Pictures are for reference only. See description for actual content. Parts may be different than pictures depending on which options are selected.

Our Price: $565.00
Stage 5 Performance Kit For 212 Predator (Non Hemi) Stage 5 Performance Kit For 212 Predator (Non Hemi)

Stage 5 Steps Up To A 24MM Flatside Carb Kit, A Powerful .308 Lift Cam With A Wide Power Band, And A Fully Race Prepped And Assembled Head. You Can Expect Around 20hp When This Kit Is Installed.
NOTE: This Is Not A Drop In Kit And Requires Mechanical Knowledge! Some Engines May Require Additional machining and Clearance, Especially Hemi Motors.

  • Header ( Choice of 4, Note 3 Stage Is An Additional $5)
  • Mikuni Style 24 mm Complete Jetted Flatside Carb Kit With a 52' Custom Throttle Cable
  • 308 Dyno Hardened Cam
  • Arc Billet Flywheel
  • ARC Billet Rod
  • Chrome Molly Push Rods
  • Flat Top Piston
  • Champion Rockers 1:1
  • Side Cover Gasket
  • NGK Spark Plug
  • Valve Cover Seal
  • Air Filter
  • Head Gasket
  • High Performance 18cc Honda Casting Head. Features Honda Premium Casting, High Flow Head, A 28.5 Stainless Intake Valve / 25mm Stainless Exhaust Valve, Billet Aluminum Retainers And Automotive Style Keepers, Dual 60 pound Springs, Head Milled to .050 For Extra Compression.
Addition Flywheel options available for additional cost.
Aluminum or Honda flywheel recommended. When the Governor is bypassed Or Removed, Stock flywheels are prone to failure and very DANGEROUS
Note: Pictures are for reference only. See description for actual content. Parts may be different than pictures depending on which options are selected.

Our Price: $1,070.00
Sale Price: $970.00
Savings: $100.00