Home > Go Kart Parts > Torque Converters, Parts, And Belts > Torque Converter Parts
Choose a sub category:
20 Series Parts 30 Series Parts (Tapered On One Side) 40 Series Parts
Springs And Buttons
Sort By:
Page of 1
Comet Bronze Bushing, 30 And 20 Series 3/4" Comet Bronze Bushing, 30 And 20 Series 3/4"

USA Made, Oil Impregnated Bronze idler bushing used on 20 and 30 series driver pulleys for a 3/4" diameter crankshaft. Great Upgrade For the Chinese Torque Converters. Best Bushing On the Market.

Measurements:
  • 1 1/16" - ID
  • 1 3/16 - OD
  • 1/2" Wide

Our Price: $5.99
Insert Button for 20, 30 & Torq-A-Verter Insert Button for 20, 30 & Torq-A-Verter

Replacement push in retaining buttons used in 20 and 30 series torque converters on the driven pulley. Sold 3 to a pack. If you are replacing all six buttons order two packs.
For Part Replacement Numbers:

  • Manco #6804
  • 22575
  • Comet #204332A

Our Price: $8.99
Green Driven Pulley Compression Spring Green Driven Pulley Compression Spring

30 series torque converter driven pulleys. Plastic stops are Insert Button for 20, 30 & Torq-A-Verter  (requires 6)

Our Price: $9.99
20/30 Series Blue Garter Spring for Driver Unit 20/30 Series Blue Garter Spring for Driver Unit

Two springs that wrap around the shoe driver assembly with blue tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by comet.

Our Price: $10.00
20/30 Series White Garter Spring for Driver Unit 20/30 Series White Garter Spring for Driver Unit

Two springs that wrap around the shoe driver assembly with white tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by Comet.

  • 011190A White Springs engage at 3100 RPM w/ Zinc Weights (stock)
  • 011190A White Springs engage at 4000 RPM w/ Alum Die Cast

Our Price: $10.99
20/30 Series Fluorescent Yellow Garter Spring for Driver Unit 20/30 Series Fluorescent Yellow Garter Spring for Driver Unit

Two springs that wrap around the shoe driver assembly with fluorescent yellow tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by Comet.
  • 216111A Fluorescent Yellow engage at 3300 RPM w/ Zinc Weights (stock)
  • 216111A Fluorescent Yellow engage at 4200 RPM w/ Alum Die Cast

Our Price: $14.99
20/30 Series Blue/Silver Garter Spring for Driver Unit 20/30 Series Blue/Silver Garter Spring for Driver Unit

Two springs that wrap around the shoe driver assembly with Blue/Silver tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by Comet.
  • 216111A Blue/Silver Springs engage at 3600 RPM w/ Zinc Weights (stock)
  • 216111A Blue/Silver Springs engage at 4600 RPM w/ Alum Die Cast

Our Price: $14.99
Comet Hub 20/30 Series 3/4", 200376 Comet Hub 20/30 Series 3/4", 200376

Center hub for 20 and 30 series driver units.

Our Price: $14.99
Tav 30 Series Torque Converter Cover/Shroud Two Color Options Tav 30 Series Torque Converter Cover/Shroud Two Color Options

Plastic cover from our 30 Series Kits (218352am). There are 2 holes on top and 2 on the bottom to mount to our 30 Series Back Plate. The holes help circulate air and cool down the pulleys. Availabe in two colors. Please choose from options above

Our Price: $19.99
Sale Price: $14.99
Savings: $5.00
Gold Driven Pulley Compression Spring Gold Driven Pulley Compression Spring

Gold Spring, Stiffest Driven Spring Available. Great For Off Road Riding.

Our Price: $16.99
Blue Driven Pulley Compression Spring Blue Driven Pulley Compression Spring

Blue spring, used on comet 20 series driven pulleys. Popular on Carter Brother's go karts

Our Price: $16.99
Torque Converter Aluminum Die Cast Race weight assembly, 20/30 Series Torque Converter Aluminum Die Cast Race weight assembly, 20/30 Series

Aluminum Die Cast Race weight assembly for the 20/30 Series Driver clutches from Comet. Go from your stock 320 gram weight assembly to this 146.8 gram aluminum die cast weight assembly. Garter Springs are sold separately. Will work well with 11188, 011190A, and 216111A garter springs.This Weight Will Provide Not Only Higher Stall But Will Increase Top End RPM.

Our Price: $34.99
30 series 3/4" Bore comet Replacement Driver Unit 30 series 3/4" Bore comet Replacement Driver Unit

30 series driver, asymmetrical 3/4" bore, with 3/16" key. Highest Quality aftermarket not made by Comet.

Used to replace:
  • Trailmaster #9.500.001
  • Manco #5957
  • American Sportworks # 14716
  • Comet # 203814
  • Comet # 219552
  • Murray # 680167
  • Murray # 1201404
  • Yerf-Dog Q43201W

Our Price: $39.99
6" 30 Series Comet Replacement Driven Pulley, 6" dia. 5/8 " bore 6" 30 Series Comet Replacement Driven Pulley, 6" dia. 5/8 " bore

Highest Quality After market Driven Clutch. 30 series driven pulley, 6" diameter with 5/8" / 16mm bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Is Not made by Comet.

Our Price: $50.00
30 Series Driven, 7" Dia. 3/4" bore, Murray style 30 Series Driven, 7" Dia. 3/4" bore, Murray style

Highest Quality After market Driven Clutch. 30 Series 7" Diameter 3/4" Bore Asymmetrical Design Murray Style. NOTE: This Is Not made by MURRAY.

Our Price: $59.95
OEM MB200 30 series Driver With Bearing OEM MB200 30 series Driver With Bearing

30 Series driver with 3/4" bore with bearing instead of bushing. Used on New MB200 mini-bikes and all Mid karts with
reverse including the Blazer 200.
Can be used to replace original bushing type driver pulley but requires next size larger belt.

Our Price: $84.00
Sale Price: $64.00
Savings: $20.00
30 series 1" Bore comet Replacement Driver Unit 30 series 1" Bore comet Replacement Driver Unit

30 series driver, asymmetrical 1" bore, with 3/16" key. Highest Quality aftermarket not made by Comet.
NOTE: If you are using a 8hp or Higher Motor, We Strongly recommend upgrading to a 40 series setup. The 30 series will
only hold up on flat surface riding. ( no warranty if it does not hold up)

Our Price: $69.99
40 Series Driven Pulley  3/4" Or 5/8" Bore Aftermarket 40 Series Driven Pulley 3/4" Or 5/8" Bore Aftermarket

40 Series Driven Pulley Aftermarket 3/4" Or 5/8" Bore. These Are NOT Comet Pulleys But Are High Quality.

  • 3/16" Keyway
  • 7" OD driven Pulley 7/8" Or 3/4"( Choose From Options Above)
  • Mounts Inboard.
  • Used with 40 series 7/8" wide belt.

Our Price: $79.00
40 Series Driver 1" Bore, Aftermarket 40 Series Driver 1" Bore, Aftermarket

40 series driver pulley 1" bore uses 7/8" wide belt. High quality aftermarket unit. This is NOT A Comet Part.

Our Price: $89.00
Comet 30 Series 3/4" Bore Driver Unit Comet 30 Series 3/4" Bore Driver Unit

Original Made in the USA by Comet. 30 series driver, asymmetrical 3/4" bore. Best Quality Driver On The Market.

Our Price: $89.99
30 Series Comet Driven Clutch Pulley, 6" dia. 3/4" Bore Part # 217779A 30 Series Comet Driven Clutch Pulley, 6" dia. 3/4" Bore Part # 217779A

Original Made in USA by Comet. 30 series driven Clutch pulley, 6" diameter with 3/4" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting. Replaces Part# 217779A

List Price: $109.99
Our Price: $99.00
Sale Price: $89.99
Savings: $20.00
30 Series Comet Driven Clutch Pulley, 7" dia. 5/8" Bore 30 Series Comet Driven Clutch Pulley, 7" dia. 5/8" Bore

Original Made in USA by Comet. 30 series driven Clutch pulley, 7" diameter with 5/8" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting. Replaces Part# 217611A

List Price: $109.99
Our Price: $99.00
Sale Price: $89.99
Savings: $20.00
Super 30 Series Driver - The Juggernaut Super 30 Series Driver - The Juggernaut

The Juggernaut (340 Clone) is everything the original 30 series drivers lacks under load. No longer do you have to sacrifice your engines power or rpm capabilities! With this new Super 30 Series Driver, you can take full advantage of a high HP high RPM small block engine (196/212/225). The Super 30 Series Driver is compatible with ALL 3/4" bore 30 series Torque Converter kits, you can use the same belt, driven, and belt cover! This driver is recommended to be used with higher rpm engines. On a stock motor running at 3600 rpm you will not see much difference in performance, running 4000+ rpm is where the Juggernaut shines.

- No more slipping under load.

- Has been tested up to 8500 rpm

Features and Specs:

  • Bore: 3/4" (.750")

  • Key-way: 3/16"

  • 3/4" wide asymmetrical belt

  • Engagement: 2,500 RPM

  • RPM Capabilities: 8,500+ RPM

  • All new design with 3 rollers and 6 springs

  • No adjustments needed

  • Limits/Eliminates belt slippage

  • Improved Reliability and Performance on high HP small block engines

  • Compatible with all 30 series TAV kits with 3/4" bore (comet and aftermarket)

  • Slightly larger diameter then a regular 30 series driver but still works with the same covers and belt


List Price: $149.99
Our Price: $130.00
Sale Price: $89.99
Savings: $60.00
30 Series Comet Driven Clutch Pulley, 6" dia. 5/8" Bore 30 Series Comet Driven Clutch Pulley, 6" dia. 5/8" Bore

Original Made in USA by Comet. 30 series driven Clutch pulley, 6" diameter with 5/8" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting.

List Price: $105.00
Our Price: $99.99
Sale Price: $95.00
Savings: $10.00
30 Series Comet Driven Clutch Pulley, 7" dia. 3/4" Bore 30 Series Comet Driven Clutch Pulley, 7" dia. 3/4" Bore

Original Made in USA by Comet. 30 series driven Clutch pulley, 7" diameter with 3/4" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting. Replaces Part# 217778A

List Price: $105.00
Our Price: $99.00
Sale Price: $95.00
Savings: $10.00
40 Series TAV Combo Drive and Driven, Aftermarket 40 Series TAV Combo Drive and Driven, Aftermarket

Aftermarket 40 Series Driver And Driven Pulley Combo. THIS IS NOT MADE BY COMET
  • Driver Is A 1" Bore With 1/4" Key Way
  • Driven Is 7 inch 5/8" Diameter With 3/16" keyway
  • 40 Series use A 7/8' Wide Belt Rated Up To 18hp
  • This Is A Inboard mount Driven Unit

Our Price: $149.99