The Starter Cup On The Flywheel Allows The Recoil Prongs To Engage With The Flywheel To Start The Engine. These Starter Cups Are Replacements For 196cc, 6.5HP Clone, Honda GX200, Ducar 196, Ducar / Tillotson 212, Tillotson 196R/RS, Tillotson 212R, Tillotson 225RS, And BSP 196 & 212 Engines.
Starter Cup Length: APPROX. 1-3/4" Or 45mm
**Before Ordering, Check The Length Of Your Starter Cup, As There Are So Many Different 196 Engines And Some May Need Longer Starter Cups Due To The Blower Housing Width. Also Check The Distance Between The Flywheel And The Recoil. Once The Plastic Fan Is Removed, Some Flywheels May Require A Longer Starter Cup To Engage.**
|
A Heavy Duty Replacement that fits 6.5HP Clone, Honda GX200, Ducar 196, Ducar/ Tillitson 212E, Tillitson 212R, Tillitson 196R/ RS, Predator 212, Predator 224, BSP 196, and BSP 212 Engines.
|
A replacement that fits 6.5hp Clone, Honda gx200, Ducar 196, Ducar/Tillitson 221E, Tillitson 221R, Tillitson 196R/RS, Predator 212, Predator 224, BSP 196, and BSP 212 Engines
|
Premium Replacement Pull Starter For Honda and Honda Clone Engines, Predator 212 Engines. Used on Hammerhead 80T, Shark and Trailmaster Mini Bikes and Mid Karts. Due To Different Variations Over The Years, Different Starter Cups May Be required.
|
|
Premium Replacement Pull Starter For Honda and Honda Clone Engines, Predator 212 Engines. Used on Hammerhead 80T, Shark and Trailmaster Mini Bikes and Mid Karts. Due To Different Variations Over The Years, Different Starter Cups May Be required.
|