This is priced for one spindle.
NOTE- The 10549 / 6257 spindles are being reproduced out of a heavier material than the stock spindles.
The 10548 / 6256 spindles are the original spindles. These work together but are physically different appearance.
Manco, right (passenger) side for most 4xx model karts, axle length is 5".
10549 replacement for Manco 6257 same spindle with l" longer axle.
Manco, left (driver) side for most 4xx model karts, axle length is 5".
10548 replacement for Manco 6256 same spindle with 1" longer axle
Kingpin hole is 1/2"
Axle length is 5"
Axle diameter is 5/8"
Spindle shaft height- 2 3/8"
Shock - 12" Length - 12MM Hole ID
Shock Absorber, Mechanical 3 Way Adjustment, 2.0″ Maximum Inches Compression, 450 LBS. Total Load Compression, 12″ EYE-TO-EYE, 12MM/.47″ HOLE ID, CHROME SPRING
Shock - 12" Length - 3/8" (.375") Hole ID
Shock Absorber, Mechanical 3 Way Adjustment, 2.0″ Maximum Inches Compression, 450 LBS. Total Load Compression, 12" eye to eye.
3/8" (.375") Hole ID With Chrome Spring.
10" Neoprene Go Kart Steering Wheel
10" Steering Wheel for Go-Karts. This wheel has a 1/2" diameter center hole, (3) 1/4" mounting holes, and 1-3/8" center to center (outside holes).
- Size: 1/2" center hole, (3) 1/4" mounting holes, 1-3/8" center to center outside holes
- 2-1/4" deep
Our Price: $39.99
Sale Price: $34.99
Strut Spindle for Midxrx/ 80T
80t strut. Used on Hammerhead 80T and TrailMaster Midxrx karts with 6.5hp engine. This strut does not work with the 80cc Hammerhead or TrailMaster Mid XRS models. Hardware not included.
TrailMaster Mid XRS uses the 2.100.055 / 057
2.000.055- right hand passenger side
2.000.057- left hand driver side
Our Price: $69.99
Sale Price: $59.99
2pcs 11'' MB200/Hurricane High Performance Rear Gas Shock
SR Racing 11" MB200/Hurricane Rear Air Shock Absorbers Suspension For Mini Bikes
A Great Performance Upgrade For The MB200 And Hurricane Mini Bikes.
These Are A Must For Avid Off Road Racer!
Placement On Vehicle: Rear, Left, RightFeatures:1.Pressure can be adjusted by springs and air (nitrogen).2.High quality, high-performance mini bike parts. 3.The damper and spring designed for long durability.4.Reduce bumps in the driving of motorcycles.5.Easy to install.
- Total Length: 310mm
- Eye Core Length: 280mm
- Eye Diameter: 12mm
- Eye Thickness: 20mm
- Spring Thickness: 7mm
- Spring Width: 60mm
- Working Stroke: 60mm
- Factory Air Pressure: 0.4 Mpa
- Maximum Air Pressure: 0.5 Mpa
- Air Reservoir: Adjustable
- Nitrogen filled
Package Includes:2 X Shock Absorbers2 X 10mm And 12mm Bushings2 X Adjust Spring Tools
List Price $119.99
Our Price: $99.99
Sale Price: $89.99