Crankshaft, Stroker, 62mm/2.44'' Stroke, 1.181" 30 MM rod journal
Things to Know:
- The "Stroker" 62mm Crankshaft For Clone And Predator Small Block Engines.
- 62mm / 2.44" Stroke
- 30 MM " rod journal / crank pin (GX200 Clone) Can Use Standard Journal ARC And EC Rods Which Can Make It NIce To Install Without Shaving Piston)
- Crankshaft does not have governor gear
- The cast 62mm Crankshaft Is Made of Ductile Iron which has the ability to bend and flex before breaking.
- The journals are hardened to reduce wear and increase the strength of the crankshaft.
May require clearance to fit in your block.
This is NOT a drop-in part and may require an experienced engine builder to assemble.
It is highly recommended to balance the rotating assembly when using this 62mm crank.
Compatibility
- Crank Pin: Aftermarket - 30MM Tillotson / Honda
Engine Displacement Increase
- (196) - 68mm Bore X 62mm Stroke = 225cc
- (212) - 70mm Bore X 62mm Stroke = 238.6cc
- (225) - 72mm Bore X 62mm Stroke = 252.4cc
- (3") - 76mm Bore x 62mm Stroke = 281.2cc
