Our New Rotating Assembly Is Designed For The Predator 212 Hemi To Increase Displacement To 223cc
The Predator Hemi Has A Shorter Deck Height Than Most Other Honda-Based Clone Engines. Due To The Deck Height, It Was Difficult To Use Current Aftermarket Components With The 58mm Stroker Crank In This Block. Usually, Stroking The Engine Required Clearance Of The Rod, Cam, Crank, And Piston For Fitment. We Have Resolved These Issues With Our 58mm Stroker Kit For The Predator Hemi.
Kit Components:
Wildcat 223cc, 70mm Flat Top Piston- The Wildcat Piston Provides Clearance Between The Crank’s Counterweights and Piston Skirt. The Wildcat Piston Is Also Lighter Due To The Different Designs. The Piston Comes As A Complete Assembly With Rings, Wrist Pins, And Circlips.
EC Pinnacle Forged Rod- The Forged Rod Is Shorter Than Stock To Set The Flat Top Piston At Zero Deck Height (Some Variance May Be Expected with Mass-Produced Blocks.) Unlike Many Other Rods, The Dipper Doesn’t Interfere With The Cam Core, Making Installation Easier.
Wildcat 58mm Crankshaft- the Crankshaft Is the Same Used EC236R And The Wildcat 223 Engine. The Crankshaft Should Only Require Clearance Matching With The Camshaft, Depending On The Lobe Profile And The Compression Release. The Crankshaft Also Using The Honda / Clone Tapered Flywheel; The Hemi Flywheels Will Not Work. We Recommend Using Our SK200 Rev Wheel.
The Purpose Of This Kit Is To Offer More Displacement To Predator 212 Hemi For Classes That Are Limited To Predator Brand Engines.
