Home > Fuel And Air Components > Carburetors and Carb Parts > Carburetor Jets
Choose a sub category:
Honda/Predator/Clones Mikuni
Sort By:
Page of 1
Jet, Mikuni, Main, Hex (fits Flat Slide and Large Body Round Slides) Jet, Mikuni, Main, Hex (fits Flat Slide and Large Body Round Slides)

Pilot jet used in Mikuni Flat Slides and Large Body Round Slides
Mikuni No. VM28/210

Fits flat slide carbs 24 thru 44mm (except Pumpers) and new style Round slide (horizontal mounted main jet)

Will not fit the Small Body Carbs used in OEM applications or "Chinese" Mikunis,
Will NOT fit VM33 (pumper) smooth bore carbs.
Will not fit old style round slide carbs with vertically mounted (inside bowl) main jet



NO RETURNS ON JETS
MAKE SURE PICTURE MATCHES YOUR JET

Our Price: $3.99
Jet, 22mm Chinese Mikuni, Main, (M5 x .8) Jet, 22mm Chinese Mikuni, Main, (M5 x .8)

Main jet for the small body 22mm Small Body Mikuni carbs. Also referred to as "Chinese" Mikunis. These are also what is typically used in Mini-Bike & karts due to the lower cost. M5 x .8mm Thread

Will not fit any other Mikunis (such as Large Body Round Slides, Flat Slides, etc)

Note: Not all Small Body (Chinese) Mikunis use the .8mm Thread. Some (esp those a few years old) use the .75mm Thread. Other than the thread size, the jets are the same. The thread size is close enough that with mild force (and a drop of oil), either jet can be used.


NO RETURNS ON JETS
MAKE SURE PICTURE & THREAD MATCHES YOUR JET

Our Price: $3.99
Jet, Mikuni, Pilot, VM28/210, Flat Slide & Large Body Round Slide Jet, Mikuni, Pilot, VM28/210, Flat Slide & Large Body Round Slide

Pilot jet used in Mikuni Flat Slides and Large Body Round Slides
Mikuni No. VM28/210

Fits older round slide (Large Body) and all flat slide carbs 28 thru 44mm and VM33 (pumper) smooth bore carbs

Will not fit the Small Body Carbs used in OEM applications or "Chinese" Mikunis,


NO RETURNS ON JETS
MAKE SURE PICTURE MATCHES YOUR JET

Our Price: $3.99
Jet, Mikuni, Pilot, VM486/210 (22mm Small Body & Chinese Round Slide) Jet, Mikuni, Pilot, VM486/210 (22mm Small Body & Chinese Round Slide)

(NOTE: 17.5 is the Most Common)
Pilot jet used in Mikuni RS and HS carburetors, and small body Mikunis
Mikuni No. VM28/486
Fits Mikuni Small Body 22mm thru 26mm Round Slide Carbs.
Small Body Carbs are used in OEM applications. Also referred to "Chinese" Mikunis (though not always true) or new style Round Slides.
These are also what is typically used in Mini-Bike & karts due to the lower cost
Will not fit Flat Slide or Large Body Round Slide.
-NO RETURNS ON JETS-
-MAKE SURE PICTURE MATCHES YOUR JET-

Our Price: $3.99
Jet, Pilot, 6.5 OHV, 212 Predator, & BSP "Clone" Class Jet, Pilot, 6.5 OHV, 212 Predator, & BSP "Clone" Class

Choice of .022", .024", or .029"

Suggested for Race Carbs

  • Bored Carbs, Gas, .022”

  • 390 Carbs, gas, .024”

  • Methanol Carbs, .029”

    NO RETURNS ON JETS

    MAKE SURE PICTURE & THREAD MATCHES YOUR JET

Our Price: $4.99
Jet, Main, GX Series, Genuine Honda, GX120 thru GX390 series, Predator 212 and 220 Jet, Main, GX Series, Genuine Honda, GX120 thru GX390 series, Predator 212 and 220

OEM Jets for Honda Motors And Clones
NO RETURNS ON JETS

MAKE SURE PICTURE & THREAD MATCHES YOUR JET

Our Price: $5.99
Emulsion Tube DJ-1251 BSP/Clone GX140 "E" Tube Emulsion Tube DJ-1251 BSP/Clone GX140 "E" Tube

This E-tube has a slightly larger main bore and less air bleed holes providing a better fuel signal at the jet. Improves performance across the RPM range, but especially on bottom end and mid range. You will want a main jet between .035" and .037" and low speed jet around .024" depending on how much you can bore out the carb venturi and which cam you use. This tube is legal in both Superbox and BP. It is not permitted in Box Stock classes. Fits All Honda And Honda Clones

NO RETURNS ON TUBES

Our Price: $7.99