Pilot jet used in Mikuni Flat Slides and Large Body Round Slides
Mikuni No. VM28/210

Fits flat slide carbs 24 thru 44mm (except Pumpers) and new style Round slide (horizontal mounted main jet)

Will not fit the Small Body Carbs used in OEM applications or "Chinese" Mikunis,
Will NOT fit VM33 (pumper) smooth bore carbs.
Will not fit old style round slide carbs with vertically mounted (inside bowl) main jet


NO RETURNS ON JETS
MAKE SURE PICTURE MATCHES YOUR JET

Main jet for the small body 22mm Small Body Mikuni carbs. Also referred to as "Chinese" Mikunis. These are also what is typically used in Mini-Bike & karts due to the lower cost. M5 x .8mm Thread

Will not fit any other Mikunis (such as Large Body Round Slides, Flat Slides, etc)

Note: Not all Small Body (Chinese) Mikunis use the .8mm Thread. Some (esp those a few years old) use the .75mm Thread. Other than the thread size, the jets are the same. The thread size is close enough that with mild force (and a drop of oil), either jet can be used.


NO RETURNS ON JETS
MAKE SURE PICTURE & THREAD MATCHES YOUR JET