Home > Performance Engine Parts > Valves, Springs, Retainers, and Components
Choose a sub category:
Guide Plates Keepers Lash Caps
Retainers Shims Valve Guides
Valve Seats Valve Springs Valves
Valve Covers and Spacers
Sort By:
Page of 1
Valve Spring Shim Rotator, ( Lash Cap) Exhaust Valve, Predator And GX120 to GX200 Stock Lash Caps Sold Each, 5.5 mm, (Hemi Predator, GX200 & 6.5 Chinese OHV's)
Valve Spring Shim
Our Price: $0.99
Available in three thickness For Big Block And Small Block: .015", .030" .060" Please Make Sure Of What Size Block You Are Ordering For

Small Block:
fits GX120, Briggs Animals, GX160s, etc.
Big Block: fits GX240/390, and 13hp Chinese OHV’s etc.

Note: Shim thickness may vary slightly.
Sold Individually, Stock Replacement Lash Cap for Predator 212 And GX120 to GX200 Stock Lash Caps. 5.5 mm Sold Each. For Hemi Predator, GX200 & 6.5 Chinese OHV's.
Middle Groove Keepers, pair, 5.5mm, Guide Plate, Billet, GX200 High Groove Keepers, pair, 5.5mm,
Use with Aluminum Retainers, 5.5mm Stem (GX200, 6.5 Clones)
Sold as a pair (2 keepers) to do 1 Valve.
Billet Guide Plate for use with Chrome Moly Push Rods For the GX200
Use to increase spring pressure with aluminum retainers 5.5mm Stem (GX200, 6.5 Clones)
Sold as a pair (2 keepers) to do 1 Valve
Valve Guide Bronze Small Block, 6.5 mm, GX270 & GX390 Valve Springs, 18 lb, 212 Hemi Predator Pair Valve Springs 26 lb. GX 200, Clone, 212 Predator Hemi and Non Hemi Pair
Small Block Valve Guide 6.5mm Stem size. Must be reamed or honed to size, Each (sold individually - 2 required per head) Racing Valve Spring, 18lb closed pressure. Fits new style Predator (Hemi Head) engines.
( Jack) White Stripes) Spring, Valve, 26 lb at .850, Coil Bind at .425 lift (.425 spring) , Price Each, 7500 max rpm, Use with F200 and 280 cams. Small diameter spring. Can be used with stock retainers. Reinforced or Billet Rocker arms Recommended.
Fits all GX120 to Gx200 Hondas, 6.5 Chinese OHVs, and Old Style Predators. Can be used on new style Predators, but spring pressure will be slightly higher.

Note: Actual coil bind is dependent on several factors including valve length, retainer style, keeper style, and valve height. Figures given are for reference only. Seat pockets for dual springs can typically be cut an additional .050

Guide Plate, Billet, 390 Valve Guide Bronze Big Block, 5.5 mm, GX200, GX160, 6.5 Chinese OHV, & 212 Predator Valve Spring 18 lb. (883) GX200s, Clone And Old Style Predators,pair : Genuine Honda
Billet Guide Plate for use with Chrome Moly Push Rods For the GX390
Big Block Bronze Valve Guide for GX160, GX200 & 6.5 Chinese OHV engines. 5.5mm Stem size. Must be reamed or honed to size, each (sold individually - 2 required per head).
Works only on Old Style Predators with 5.5mm stems. Will not work on Predators with 5.0mm valves.
Genuine Honda, 18lb closed pressure

Fits all Honda GX120 to GX200s, 6.5 Chinese OHVs, and Old Style Predators. Will not work with new style Predators unless spring pocket is cut.

Sold as a Pair

No Returns on this product, if you have questions about it, Please call before ordering.
Valve Springs 37 lb., GX 200, Clone, 212 Predator Hemi and Non Hemi Pair Red Stripe (Improved), Pair Valve Springs, 22 lb.,GX 200, Clone, 212 Predator Hemi and Non Hemi Pair Pair Lash Caps Pair, 5.5 mm, Hardened for Stainless Valves (GX200 & 6.5 Chinese OHV's)
38 lb at .815, 65lbs open. Large diameter spring, Alum Retainers recommended, Coil bind at >.450 (.365 spring), 7500 max RPM, Reinforced or Billet Rocker arms and CM Pushrods Required
Fits all Honda GX120 to GX200s, 6.5 Chinese OHVs, and Old Style Predators. Will not work with new style (Hemi) Predators unless spring pockets are cut.

Note: Actual coil bind is dependent on several factors including valve length, retainer style, keeper style, and valve height. Figures given are for reference only. Seat pockets for dual springs can typically be cut an additional .050

Spring, Valve, 22 lb at .815, Coil Bind at .335 lift , Sold as a Pair, 6500 max rpm, Use with Ctock, CL1, and Mod 2 Cams. Small diameter spring. Can be used with stock retainers. Stock Rockers Arms okay

Fits all GX120 to GX200 Hondas, 6.5 Chinese OHVs, and Old Style Predators. Can be used on new style Predators, but spring pressure will be slightly higher.

Note: Actual coil bind is dependent on several factors including valve length, retainer style, keeper style, and valve height.

Lash cap Pair for Racing Valves. Used to correct Valve Train Geometry (Required with Roller Rockers)
Lash caps Pair, 6.5 mm, Big Bore Hardened for Stainless Valves (GX270 & GX390) Springs, Valve, HD, 50lb Single (Blue Stripe), GX270, GX390s & 420 Predators, Pair Valve Seat
Valve Seat
Our Price: $11.99
Big Block Lash cap Pair for Racing Valves. Used to correct Valve Train Geometry (Required with Roller Rockers)
Spring, Valve, Heavy Duty, set (Fits 240, 270, 340, & 390s). Approx 50 lbs at 1.125 installed height, 42lbs at 1.2, with 110 lb open pressure (.375 lift)

Valve Seats for oversize valves 28 to 42mm. Seats are listed by recommend valve size.

Size & application for seats:
· 28mm Seat: 30.7mm O.D. x 6.3 thick, use for 28mm and 28.5 Valves

· 32mm Seat, 33.6mm O.D. x 6.3 thick, use for 32mm Valves

· 36mm Seat, 38.25mm O.D. x 8.9mm thick, Use for 34 to 36mm Valves

· 40mm Seat, 41.5mm O.D. x 8.9mm thick, Use for 38 to 40mm Valves (Note: These Cost $14.99)

· 42mm Seat, 43mm O.D. x 8.9mm thick, Use for 41 to 42mm Valves (Note: These Cost $14.99)

28 & 32mm Seats are for GX200, 6.5 OHV, and 212 Predator Applications. 36mm and up seats are for GX270/390, 13/15 OHV, and 420 Predators

Valve Springs, 37 lb., Pair, Green Stripe Valve Springs, 60lb, Dual, for GX200, 212 Predators Hemi and Non Hemi, Pair 65 Pound Valve Springs, HD, Dual, GX270/390/420 pair
Spring, Valve, New Design w/Green Stripe. Original Design
37 lb at .815, 55lbs open. Large diameter spring, Alum Retainers recommended, Coil bind at .380. 7500 max RPM, Reinforced or Billet Rocker arms and CM Pushrods Required
Fits all Honda GX120 to GX200s, 6.5 Chinese OHVs, and Old Style Predators. Will not work with new style Predators unless springs pockets are cut and longer valves are used.

Note: Actual coil bind is dependent on several factors including valve length, retainer style, keeper style, and valve height. Figures given are for reference only. Seat pockets for dual springs can typically be cut an additional .050

Dual Springs, esp. Designed for Honda and Chinese OHVs. NOT A BRIGGS SPRINGS
Dual, 60 lb at .815", (34 lbs at .950 & 88 lbs at .570"), Large diameter spring, Alum Retainers required, Coil bind at >.450 lift (.380" spring), 9000+ RPM,
Fits all Honda GX120 to GX200s, 6.,5 Chinese OHVs, and Old Style Predators. NOTE: Will Not Work With New Style Hemi Predator unless Spring pockets Are Cut.

Note: Actual coil bind is dependent on several factors including valve length, retainer style, keeper style, and valve height. Figures given are for reference only. Seat pockets for dual springs can typically be cut an additional .050

Spring, Valve, Dual, set (Fits 240, 270, 340, & 390s). Approx 65 lbs at 1.125 installed height, 60lbs at 1.2, with 140 lb open pressure (.375 lift)
32lb Dual Valve Spring, Clone GX200, Clone, Predator 212 Hemi and Non Hemi Retainer Set, 5.5 mm 37lb Springs  (GX200, 6.5 OHV), Aluminum, 37lb Springs Retainer Set, 5.5 mm For 26lb Springs (GX200, 6.5 OHV)
These Springs Are 32lb At .925, 42lb At .825 up To .400 Lift
Spring pockets will need to be cut.
Retainer set for Large 30lb & 37lb Springs, Aluminum for use with Dual Springs And SS Valves. Includes a set of Split Keepers. For 5.5mm Stem(GX200, 6.5 OHV), Aluminum, 37lb Springs Retainer Set, 5.5 mm For 26lb Springs (GX200, 6.5 OHV), 18, 22, & 26lb springs.
Set Includes two Keepers with 5.5mm Middle Grooves, and Two Spring Retainer plates
Retainer Set, 6.5 mm (GX270, GX390), Aluminum Billet Dual Retainer, 5.5 mm (GX200, 6.5 OHV), Aluminum, Dual Spring Guide Plate, Free Floating w/bronze bushing, 3/16" - GX200, GX160, & 6.5 Chinese OHV
Retainer, Aluminum for use with split keepers, for use with HD/Dual Springs & SS Valves. 6.5mm Valve Stem
Comes As A Set of Two Retainer Plates and 2 6.5mm Keepers.
Retainer, 7075 Aluminum for use with split keepers, for use with large (37lb) or Dual Springs & SS valves. 5.5 mm Valve Stem (GX200, 6.5 Chinese OHV) Includes A Set Of Keepers
HP GUIDE PLATE, Designed and manufactured for precise push rod fit and function. Oil Impregnated Bronze bushings provide The guide plate accurately and smoothly fills the need for absolute control of side to side push rod movement. GX 200, 160s, and 6.5 Chinese OHVs (will not fit 120s)
Titanium Retainer, 5.5 mm (GX200, 6.5 OHV) Titanium Retainer, 6.5 mm Set (GX270, GX390) F1 Beryllium Seat
F1 Beryllium Seat
Our Price: $49.99
Retainer, Titanium for use with split keepers, for use with large (37lb) or Dual Springs & SS valves. 5.5 mm Valve Stem (GX200, 6.5 Chinese OHV) Includes A Set Of Keepers.
Retainer, Titanium for use with split keepers, for use with HD/Dual Springs & SS Valves. 6.5mm Valve Stem. Comes As A Set With Keepers.

Hi Performance Valve Seats Made From Beryllium Valve Seat. For GX 200, Predator 212, Honda Clones,