5/8X3/25  Bronze Bushing. Goes Between Frame And Fork. Works with Many Vintage Mini Bikes.

This is the Neck Bearing Used in the Coleman CT200, Mini Bike. It Is Also Used In A Wide Range Of Vehicles Including Razor Kick Scooters, Ripstick, Razor Electric Scooters, Currie, Bladez, Izip, and many more. See Dimensions Below

• Inner Diameter: 8mm
• Outer Diameter: 22mm
• Width: 7mm

Nylon Bushing Goes Between Frame And Fork. 13/16 X 5/8.

Bottom Fork Plates For Front Springer Suspension. Top Hole Is 10mm. Two Bottom Fork Holes Are 7/8" Inch.
Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"

Top Fork Plate For Front Springer Suspension.
The Top Hole is 1/2"
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.

Top Fork Plate For Front Springer Suspension. Designed for Motovox, Doodlebug, And Monster Moto
The Top Hole is 10'MM
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.

Harrison Bottom Fork Plates For Front Springer Suspension. Top Hole Is 1/2". Two Bottom Fork Holes Are 7/8" Inch. Top hole can be drilled out to 5/8'mm or Can Be Modified And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"

Original NOS Ruttman Front Springs. Can be Used On Other Minibikes. Chrome plated Heavy Duty

7/8" Diameter Down Tube For Front Springer Forks. 19" Length. Can be Cut To Custom Length As Needed. Made For 5/8' Axle

Front fork with rubber caps for Mega Moto Mini Bikes.

Fits:

• Mega Moto B80
• Mega Moto B105
• Mega Moto E1000
• Doodlebug DB30
• Motovox

Trailmaster Storm 200 Front fork.

Azusa Front Fork and Hardware Set for Minibikes.
NOTE: Do To The Unusual Size And Shape of This item, Extra Shipping Cost Has Been Added In The Form Of Increased Weight

Universal, bolt on, telescopic fork mini bike front end. This is an excellent upgrade to almost any mini bike as it will completely change the way your mini handles and rides. The high quality rubber seals ensure a long life of this telescopic front end. With its fully adjustable lower fork clamp, this front end can be mounted onto virtually any mini bike with a similar length set of forks. If your mini bike has a 5/8" kingpin or axle then simply enlarge the kingpin/axle holes with a 5/8" drill bit.
Great For Monster Moto, Doodlebugs, Small Baja's with the 4hp Engine

NOTE: MAY HAVE SOME SMALL COSMETIC BLEMISHES

This hydraulic front end can be modified to fit virtually any old school mini bike with similar length forks.

• two telescoping forks
• upper fork plate with bolts
• lower fork clamp with pinch bolts
• 12mm axle bolt
• 12mm axle nut
• axle spacers
• Dimension:

Great Way To Add Suspension To Any Coleman CT200. This Is A Direct Fit Kit. Wheels And Fender Will Bolt Right On! Made From All DOM Steel. All Welds Are Tig Welded. Very High Quality, All Materials And Labor Are From The USA. Risers And Handle Bars Not Included But can Be Chosen As Add On In options Above. If Handle bars Are Added, An Additional shipping charge of $15- Will Apply Do To Size Of Handle Bars