Home > Fuel And Air Components > Carburetor Intake Manifolds
Choose a sub category:
Briggs Intakes Fuel Fittings and Accessories GX200, 212 Predator, & 6.5 BSP "Clones"
GX390, 420s, & 460s Hoses & Adapters
Sort By:
Page of 1
Hose, 1 7/8 inch 24/28mm For Mikuni Carbs Hose, 1 7/8 inch 24/28mm For Mikuni Carbs

Used to adapt Mikuni Flat Slides to Manifolds, Use for 24/28mm (Hose is Coil Wound And may Have Slight Variations in Exact Length I.E May Be Slightly Longer Or Shorter)

Our Price: $5.99
Hose, 1 1/2" fuel, ft. (Mikuni Carbs) Hose, 1 1/2" fuel, ft. (Mikuni Carbs)

Used to adapt Mikuni Flat Slides to Manifolds, Use for 33/34mm (Hose is Coil Wound And may Have Slight Variations in Exact Length I.E May Be Slightly Longer Or Shorter)

Our Price: $5.99
Carb to Hose Manifold Adapter, 24/28mm Mikuni to GX200 manifolds, Straight Carb to Hose Manifold Adapter, 24/28mm Mikuni to GX200 manifolds, Straight

Used to adapt Mikuni Flat Slides to Manifolds, Use for 24/28mm

Color May vary. Made of High Temp Silicone.

Our Price: $6.99
Carb to Hose Manifold Adapter, 33/34mm Mikuni to GX200 manifolds, Straight Carb to Hose Manifold Adapter, 33/34mm Mikuni to GX200 manifolds, Straight


Color May vary. Made of High Temp Silicone.

Our Price: $7.99
Air Intake For Mikuni VM 22, with gasket Air Intake For Mikuni VM 22, with gasket

Alloy adapter to use a Mikuni VM 22 carburetor on the Predator 212cc engine.Includes Gasket
Description
  • Overall length 48mm or 65mm you choose
  • Venturi 26mm
  • Mounting holes are 48mm apart, carburetor mounting holes are slotted so carburetor can be twisted as needed.

Our Price: $19.99
Intake Manifold for 6.5HP Clones & Predators Intake Manifold for 6.5HP Clones & Predators

Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200, Predator 212. No Pulse Fitting
  • Flange Thickness: 8.15mm
  • Overall Lenght: 69.75mm
  • Tube OD: 32mm

Our Price: $25.00
Intake Manifold, Mikuni 24/28 mm Flat Slide With Pulse Fitting Intake Manifold, Mikuni 24/28 mm Flat Slide With Pulse Fitting

Intake Manifold, 24mm Flat Slide Mikuni (and 24mm Keihen) to GX200 With Pulse Fitting
  • Stub is 1.25" OD, 1.135" ID (Blended to D-Shape) x 1.45"
  • Overall Length is 2.19"
  • Includes Pulse fitting and block off plug
  • ( Note:May be natural aluminum finish or black anodized depending on availability (usually these are black)

Our Price: $39.99
Manifold/Intake, 390 Carb to GX200, 6.5 Chinese OHV, & 212 Predator, Long Style, 1 pc Manifold/Intake, 390 Carb to GX200, 6.5 Chinese OHV, & 212 Predator, Long Style, 1 pc

Intake Manifold, GX390 Carb to GX200. Does not require insulator plate. Includes Pulse fitting for Fuel pump.
Typically requires a 100 Main Jet for std bore Gas GX390 carbs and 102 or 105 for Gas Bored Carbs. Methanol carbs will need a 150 to 160 Main.

Our Price: $44.99
Intake, 22 Mikuni to GX200 & 212 Predator, Long, With Pulse Fitting Intake, 22 Mikuni to GX200 & 212 Predator, Long, With Pulse Fitting

Intake Manifold, Mikuni 22mm carbs to GX200. Also adapts GX390 and most flanged carbs.
With pulse fitting to run fuel pumps
( Note: May be natural aluminum finish or black anodized depending on availability (usually these are black)

Our Price: $45.00
Manifold, With Pulse Fitting Mikuni 33/34 mm to GX390 Manifold, With Pulse Fitting Mikuni 33/34 mm to GX390

Intake Manifold With Pulse Fitting, Flat Slide Mikuni to GX270s and 390s

Our Price: $45.00
Manifold, 22mm Mikuni to GX200, 45 degree, Curved Steel Intake, Manifold, 22mm Mikuni to GX200, 45 degree, Curved Steel Intake,

Steel Intake manifold to mount Mikuni 22mm carbs to GX200. Manifold is curved to allow carb to face rear.
This is an alternate version with a round flange (instead of D flange)

Our Price: $48.99
Briggs to Mikuni Intake (3.5 to 5.0 hp Flat Head) Briggs to Mikuni Intake (3.5 to 5.0 hp Flat Head)

This Intake Allows You To mount 19MM to 22mm Mikuni Carbs to Briggs Flathead Engines 3.5 to 5.0hp. This Intake Is Designed For Flat Engine Plate Applications. Please See Pics. Made In The USA By Team Studz.

Our Price: $50.00
Briggs to Mikuni Slanted Intake (3.5 to 5.0 hp Flat Head Slanted Engine Mount) Briggs to Mikuni Slanted Intake (3.5 to 5.0 hp Flat Head Slanted Engine Mount)

This Intake Allows You To mount 19MM to 22mm Mikuni Carbs to Briggs Flathead Engines 3.5 to 5.0hp. This Intake Is Designed For SLANTED Engine Plate Applications Found On Rupps, Speedways, MTD, Gemini Etc.Made In The USA By Team Studz.

Our Price: $50.00
Briggs to 24 Mikuni Intake Briggs to 24 Mikuni Intake

This Intake Allows You To Mount A 24mm Mikuni Carburetor To A 5hp Flathead Briggs Engine ( Raptor Style) Made In The USA By Team Studz!

Our Price: $55.00
F&B Racing Billet Tapered Intake For Small Block to Big Carb F&B Racing Billet Tapered Intake For Small Block to Big Carb

High Quality Machined Billet Alluvium Intake. Custom tapered design For Max Flow When Using large Carbs Such as 32mm 33 Pumper And 34. Comes with 1/16th Pulse Fitting

Our Price: $90.00