Sold By the Foot, Color Wire Loom Can Be used For Covering Wires And Brake Lines. The Unique Braided Construction And Wide Expandability Allows Quick And Easy Installation Over Large Connectors And Long Runs. The Wide Range Of Available Colors And Sizes Allows Easy And Systematic Color Coding In Complex Wiring And Cabling Schemes. The Material Has A Wide Operating Temperature Range, Is Resistant To Chemical Degradation, UV Radiation, And Abrasion. The Sleeving Cuts Easily And Cleanly With a Hot Knife And Once Installed, Will Beautify And Protect Any Wire, Hose Or Cable Application.

Sold By the Foot, Color Wire Loom Can Be used For Covering Wires And Brake Lines. The Unique Braided Construction And Wide Expandability Allows Quick And Easy Installation Over Large Connectors And Long Runs. The Wide Range Of Available Colors And Sizes Allows Easy And Systematic Color Coding In Complex Wiring And Cabling Schemes. The Material Has A Wide Operating Temperature Range, Is Resistant To Chemical Degradation, UV Radiation, And Abrasion. The Sleeving Cuts Easily And Cleanly With a Hot Knife And Once Installed, Will Beautify And Protect Any Wire, Hose Or Cable Application.

NGK Spark Plug Resistor Plug end 90 Degree. Water Proof.

Silicon Strap On Bright L.E.D light. Great For Handle Bars Or Mini Bike Frames.

• Powered by 3 AAA Batteries
• 3 light Modes, Constant On, Rapid blink, And Slow Blink.
• Comes in Bright White Light Or Bright Red (Please Specify Red Or White Light When Picking From Options)

• Self-return Reset button can be used as horn, engine power,And start kill switches.
• Made of aluminum alloy material CNC processing
• Easy to install and convenient to use, perfect for your mini bike modifications!
• Universal fit for any 12v DC electrical system.
• Waterproof

3 in 1 Multi-function combination switch

• Black
• ABS shell, PC copper wire
• Can be used as horn switch, headlight switch, turn signal switch, etc.
• Fits 7/8 Handle Bars
• Fits Any Bike With A Hydraulic Brake that already has Built in Micro switch ( Trail master MB200, Mega Moto 212 Etc)

7/8 Universal Twist hand throttle assembly. Includes handle bar grip and kill switch for pocket bikes, mini choppers and scooters, Mini Bikes and Drift Trikes. The yellow button can be wired as a push button starter or kill switch.

LED Turn Signal Set. This set of high quality alloy construction turn signals can be used on a variety of vehicles including Mini Bikes, motorcycles and mopeds. Works great in our L.E.D. Brake Light with Integrated Turn Signals.

Small Steel Battery Box For Mounting a battery to your Mini Bike For Electrical Components. Has multiple Mounting holes And For Bolts, Zip ties, Or Straps. Fits Our FIRE POWER FEATHERWEIGHT LITHIUM BATTERY 12V/24WH

• 3.3/4 Inches Wide
• 3 Inches High
• 4-3/4 Inches Long

High Performance Solid Post Racing Cable

Small Steel Battery Box For Mounting a battery to your Mini Bike For Electrical Components. Has multiple Mounting holes And For Bolts, Zipties, Or Straps. Fits Our FIRE POWER FEATHERWEIGHT LITHIUM BATTERY 12V/24WH

• 4.5 Inches Wide
• 5 Inches High
• 3 Inches Long

Vintage replacement 12 volt taillight assembly. This is a replacement for the original KD taillight used on Rupp, Speedway, Arctic Cat minibikes, and other with 12 volt system. 3-1/4" center to center on the mounting studs. Complete light with plated backing plate, red lens with clear license plate lens on the bottom.

Converts from 6 to 12 volts at the flick of a switch. Snap-cord style leads. Can Be Used For Lithium/Ion Batteries Like Our FIRE POWER FEATHERWEIGHT LITHIUM BATTERY 12V/24WH.
Is Not Automatic And Does Not Have Auto Shut Off!!

12 Volt Dual Tone Super loud Mini Bike Horn. Each Horn Can Be Used Independently or Wired In Together. Works Great With Our L.E.D. Brake Light kit with Integrated Turn Signals. Includes mounting Bracket For Easy Placement.

12 Volt, 3-Pin LED Turn Signal Relay used to solve LED turn signal related problems such as rapid flashing, not flashing or burning out bulbs. This Is the Same Relay We Use In Our L.E.D. Brake Light kit with Integrated Turn Signals Kit.

• BL+ Connects To Battery Positive
• IE- Connects To Battery Negative
• L Connects To Load

6 X 1" Inch 12-24 Volt 16 LED Light With Handle Bar Mounting Bracket. Super bright and low power consumption.

LED Power:27W (9 x 3W High Intensity LED) Spot Beam, focused light in the middle of the lane, extreme distance through the darkness. Input Voltage Of 9-30V DC. Easy Mounting For Most Applications.Includes Mounting Hardware.

Made From Aluminium ( NOT PLASTIC!) . 12 Volt Large 6000K LED light With Metal Mounting Plate. Extremely Bright, Equipped With High Intensity CREE LEDs. New Reflector Flush Mount LED Lights provides extra penetration in distance,Total of 168W at 6,000K Color Temperature,illuminating Lighting the entire forward viewing area 3 times than others,which will give you excellent visual effect and comfortable and safe driving experience. Note: Picture is for Reference only. Actual LED Light Configuration may vary but Shape, Size, And Power Will Be the Same

This will mount to any scooter, motorcycle, car, truck, or boat. All you need is 12v power and a good mounting point! Mounting bolt and relay included.

High Quality Billet Aluminum Kill Switch for 7/8 Handle Bars Or Standard Mini Bike Frame.

• Comes in Four Colors. Red, Blue, Black, And Silver. (Choose from Color Options Above)  
• Anodized billet housing is fully waterproof.
• Wires are four times more resistant to pulling out of the housing than an O.E.M. switch.
• Switches use a waterproof splicing connector so they can be used to fit all brands and years of motorcycles.
• All that is needed to install is to cut the wires to the stock connector and splice them into this new switch.

Led brake light kit consists of master control switch , Led brake light , flasher , and key code.. additional wiring , terminals not included . ( Note: Additional wiring may be required to add LED Headlight Option) this is not plug and play !!! . general electrical knowledge recommended for install
please see our you tube video for demonstration.

Led brake light kit consists of master control switch , Led brake light , flasher , and key code. additional wiring , terminals not included. This Kit Is For The New Style MB200 With Hydraulic Brakes Like Mega Moto Max And mage Moto Pro. ( Note: Additional wiring may be required to add LED Headlight Option) this is not plug and play !!! . general electrical knowledge recommended for install

This 12 Volt Battery Is Frequently used to power our L.E.D. Brake Light with Integrated Turn Signal kit but can be used for other applications. A Smaller Lightweight Battery for Tighter Applications.
Features:

• Lithium Ion Polymer technology
• All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency
• Extremely lightweight, 50% to 70% lighter than standard batteries
• Built-in LED test gauge
• Increased cranking amps over lead acid batteries
• Fast recharge, can be brought up to a 90% charge within 6 minutes
• Easily 6 to 12 times more cycle life compared to lead acid batteries
• Long shelf life, up to 1 year before requiring recharging
• Can be mounted in any position
• No hazardous acid or heavy metals, non-explosive and non-combustible
• More precise fitments compared to other brands of lithium batteries