Spring cup for 7/8" tubing, to be welded on. Inside diameter is 7/8" and outside diameter is 1-7/8". Use with our OMB_9124 spring! These are raw steel. The cups are NOS parts and may have some surface rust. Sold As A Pair

Bottom Fork Plates For Front Springer Suspension. Top Hole Is 10mm. Two Bottom Fork Holes Are 7/8" Inch.
Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"

Top Fork Plate For Front Springer Suspension.
The Top Hole is 1/2"
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.

Top Fork Plate For Front Springer Suspension. Designed for Motovox, Doodlebug, And Monster Moto
The Top Hole is 10'MM
(Top Hole Can Be Drilled Out to 5/8th for Ruttman Or Harrison And Used For Other Mini Bikes As need.)
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 4' From Center To Center
Fork Hole Diameter 10mm.

Harrison Bottom Fork Plates For Front Springer Suspension. Top Hole Is 1/2". Two Bottom Fork Holes Are 7/8" Inch. Top hole can be drilled out to 5/8'mm or Can Be Modified And Used For Other Mini Bikes As need.
Bottom Width is 10 Inches, Length Is 4 Inches.
Fork Hole Width is 8-1/2" From Center To Center
Fork Hole Diameter 7/8"

Original NOS Ruttman Front Springs. Can be Used On Other Minibikes. Chrome plated Heavy Duty

7/8" Diameter Down Tube For Front Springer Forks. 19" Length. Can be Cut To Custom Length As Needed. Made For 5/8' Axle

Shock Absorber, Mechanical 3 Way Adjustable, 2.0″ Maximum Inches Compression, 450 LBS. Total Load Compression, 12″ EYE-TO-EYE, 3/8″/.375″ HOLE ID, CHROME SPRING

Shock Absorber, Mechanical 3 Way Adjustment, 2.0″ Maximum Inches Compression, 450 LBS. Total Load Compression, 12″ EYE-TO-EYE, 12MM/.47″ HOLE ID, CHROME SPRING

Extreme Heavy Duty Adjustable Mechanical shock absorber (stiff) 3/8" X 12". For Go Karts And ATV's But Can Be used For Custom Mini Bike Applications.

Mechanical shock absorber. Max compression: 2.0". Total load compression: 450lbs. Eye to eye: 12". Chrome Plated Spring. Aslo Fits MB200

Azusa Front Fork and Hardware Set for Minibikes.

Front fork with rubber caps for Mega Moto Mini Bikes.

Fits:

• Mega Moto B80
• Mega Moto B105
• Mega Moto E1000
• Doodlebug DB30
• Motovox

Universal, bolt on, telescopic fork mini bike front end. This is an excellent upgrade to almost any mini bike as it will completely change the way your mini handles and rides. The high quality rubber seals ensure a long life of this telescopic front end. With its fully adjustable lower fork clamp, this front end can be mounted onto virtually any mini bike with a similar length set of forks. If your mini bike has a 5/8" kingpin or axle then simply enlarge the kingpin/axle holes with a 5/8" drill bit.
Great For Monster Moto, Doodlebugs, Small Baja's with the 4hp Engine

This hydraulic front end can be modified to fit virtually any old school mini bike with similar length forks.

• two telescoping forks
• upper fork plate with bolts
• lower fork clamp with pinch bolts
• 12mm axle bolt
• 12mm axle nut
• axle spacers
• Dimension:

Great Way To Add Suspension To Any Coleman CT200. This Is A Direct Fit Kit. Wheels And Fender Will Bolt Right On!  Made From All DOM Steel. All Welds Are Tig Welded. Very High Quality, All Materials And Labor Are From The USA. Risers And Handle Bars Not Included Bu can Be Chosen As Add On In options Above.