Horizontal Style Chain Tensioner Spring For BAJA, MB165 And MB200 Mini Bikes. Works With Baja Warrior Chain Tensioner Assembly.

Brake puck used in calipers 9597 and 9598 (common Manco, Fox) Manco Mechanical Brake Caliper. If you need the puck that is adheared to the caliper suggest you replace the caliper. This is for one brake puck.

This Is The Rear Axle Adjusting Assembly for the Baja Warrior, Carbon Heat, Coleman, MB200. This Is The Piece That Retains The Rear Axle Bolt, and Allows The Tension On The Chain To Be Adjusted To Suit The Rider.

This Vintage Brake Lever Is Great For Old School Mini Bikes Like Ruttmann and Lil Indian. Works on all 7/8 Bars. Uses 3/18 Barrel Cable.

Rare Original Baja Warrior Foot Peg, MB200-183, BAJ 987871001

Single 7/8″ OEM Baja Warrior Handle Bar Riser Mount

• Material:Aluminium Alloy
• Color: Black
• Handlebar hole diameter: 7/8″

Very High Quality Brake Lever Made By Cherry (In Japan). No Adjuster. Works on All 7/8 Handle Bars. Uses 3/18 Barrel Cable.

• Axle dimensions - M14 X 1.5X325
• 12.25 Inches

• Axle dimensions - M14 X 1.5X310
• 12.5 Inches

Rare Genuine Baja 987930001 Throttle Cable Fits MB200 MB200-103 1100mm OEM

Original Baja Warrior Left All Steel Brake lever With Adjuster. Will Work on 7/8 Handle Bars and 3/8 Brake Cable Barrels.

Spring Loaded Adjustable left Side Doodle Bug Brake lever.  Chrome plated lever. Can be used on any 7/8 Handle Bars.

Chain Tensioner for BB30, Motovox, And Monster Moto B80, B105, and E1000

This is the replacement brake cable for all versions of the Baja Mini Bike including MB165 and MB200. Compatible with many large 6.5 Hp engine mini bikes. Compatible with Baja Left All Steel Brake lever With Adjuster 7/8.

Split Mounting Collar with Rugged Steel Handle And Classic Ball End. Chrome Plated Complete with Adjusting Hardware. For Use on All 7/8 Handle Bars And 3/8 Barrel Cable.

• pad surface 4 1/2"
• total pad end to end 6"
• mounted pads across measure 4 1/4"

high Quality Full Size Brake Lever. Fits 7/8" handle Uses 3/16 barrel or ball type cable ends. Includes cable adjuster Used only for right hand side.

Rear brake complete assembly, fits Trailmaster MB200, Baja Warrior, Coleman CT200UEX And Duh Boss Mini-Bikes. Comes Complete With Pads. Replaces Part Number# 992 044001

4 Hole Sprocket For 420 Chain. Can Be Used On Other Applications Such as TrailMaster go Karts. Choose Tooth Count Above In Options Menu.
Fits:

• Coleman Mini Bikes
• TrailMaster MB-200
• Baja Warrior
• and similar mini bikes with 8" wheels.
• Does not fit a standard 6" wheel, the 6" wheel has a 2 7/8" bolt pattern

• 4 holes 3/8"
• 3.150" Bolt Circle
• 1.580" Center hole (Standard Size Bearings)
• 60 Tooth - 9 7/8" Diameter, Steel Sprocket
• 72 Tooth - 11 3/4" Diameter, Aluminum Sprocket

• Hub width bearing to bearing - 7 9/16"
• Rim Width - 5 1/4"
• Brake drum is 4 1/4" diameter
• Most common tire size used with is rim is 19x7-8.

• Hub width bearing to bearing - 8 1/2"
• Rim Width - 5 1/4"
• Most common tire size used with is rim is 19x7-8

• Street tire excellent for hard surfaces. Lasts Much Longer Then Standard Tire.
• Improved Top End With Slightly Larger Tire
• 20" diameter
• 7" wide
• Good for go-kart or mini-bike

High Quality 3 Stage TIG Welded Race exhaust. Great For Baja Warriors.Fits Most Mini Bike Applications Because Of Its Side Exit Location. Comes Straight Out And Back. This Usually Puts It outside Most Frames. We Strongly Recommend Exhaust Wrap Header & Exhaust Wrap, 2"x 1/16 X 10 Ft. - Black On This Pipe.