Home > Mini Bike Parts > Frames, Kits, And Accessories
Choose a sub category:
Chain/Clutch Covers Frame Kits MB200 Side Cover Plates
Frame Extensions FootPegs Fenders
Kick Stands Engine Mounting Plates
Sort By:
Page of 2
Original Baja Warrior Foot Peg BAJ 987871001 Original Baja Warrior Foot Peg BAJ 987871001

Rare Original Baja Warrior Foot Peg, MB200-183, BAJ 987871001

Our Price: $8.99
Coleman Footpeg Assembly Left for CT200 Coleman Footpeg Assembly Left for CT200

This Left side Coleman Footpeg is for the CT200.
Kit includes:
  • 1 Left Footpeg
  • Footpeg Bolt
  • Footpeg Locking Washer Plate
  • Washer
  • Cotter Pin
  • Spring
  • Ball

Our Price: $8.99
Coleman Footpeg Assembly Right for CT200 Coleman Footpeg Assembly Right for CT200

This Right side Coleman Footpeg is for the CT200.
Kit includes:
  • 1 Left Footpeg
  • Footpeg Bolt
  • Footpeg Locking Washer Plate
  • Washer
  • Cotter Pin
  • Spring
  • Ball

Our Price: $8.99
Chromed Mini Chain Guard / Clutch Guard Chromed Mini Chain Guard / Clutch Guard

Chromed Mini Chain/Clutch Guard. Mounts Directly To The Motor. Looks Great on a 79cc Micro Mini Engine.

Our Price: $9.99
Briggs/Tecumseh Chain Guard Briggs/Tecumseh Chain Guard

Briggs/Tecumseh Chain Deflector

Chain deflectors are designed to help prevent broken chain from flying up or out, instead diverting it toward the
ground. (NOT designed to prevent clothing, body parts,hair, etc. from becoming entangled in the chain.

Our Price: $9.99
Azusa Folding Foot Pegs, Pair Azusa Folding Foot Pegs, Pair

Sturdy rubber tread folding foot pegs. With long mounting studs. Folds when not in use.

Our Price: $10.99
MB200 Front / Rear Fender (Black) MB200 Front / Rear Fender (Black)

Trailmaster MB200/ Da Boss Front and Rear fender. 3 bolt mounting, measures 17 5/8" long, 7 7/8" wide and 4 3/4"

Our Price: $11.99
AZUSA Engine/Motor Adapter Mounting Plate 5" x 12", Flat (11 ga.) AZUSA Engine/Motor Adapter Mounting Plate 5" x 12", Flat (11 ga.)

Engine Mounting Plate - 5" x 12" Flat, 11 Gauge Steel
Engine Mounting Plate - 5" x 12" x 0.137 (9/64") 11 gauge with slotted mounting holes.
Product Specs:

  • Flat Engine Mounting Plate
  • 12" x 5"
  • Heavy Gauge Steel
  • Slotted Mounting Holes
  • Center to Center Distance: 2 3/4" x 5"
  • Fits all popular Small Block Engines 3HP-7HP
  • Fits Briggs & Stratton
  • Tecumseh
  • Honda, Honda Clone
  • Predator 212cc

Our Price: $12.99
4.2X14.5 Non-Plated Economy Fender 4.2X14.5 Non-Plated Economy Fender

FENDER, STEEL, NOT PLATED 14.5″ LENGTH, 3.75″ HEIGHT, MAXIMUM WIDTH – 4.2″ FOR 4″, 5″ & 6″ TIRES

Our Price: $12.99
Ruttman Clutch Cover/ Chain Guard Heavy Duty Steal Ruttman Clutch Cover/ Chain Guard Heavy Duty Steal

Heavy Duty Steel Clutch cover Offers Max Protection because it covers The Entire Clutch . Used On  Ruttmans And Lil Indians. Will Mount To Any Small Block Engine ( Honda Predator Or Engines with 4 Bolt Pattern)

Our Price: $12.99
Ruttman Clutch Cover Mounting Bracket Heavy Duty Steal Ruttman Clutch Cover Mounting Bracket Heavy Duty Steal

Heavy Duty Steel Clutch Cover Bracket. Used to Attach The Clutch Cover to The Motor. Also Used In out Brake Band Kit

Our Price: $12.99
Non Plated Fender for 8" & 10" Tires Non Plated Fender for 8" & 10" Tires

4-1/2" Overall Width: 4-3/8"Curved Length: 18-3/8"Inside Flat Width (Before curled sides): 3-1/2"

Our Price: $14.99
Harrison Topper Light Duty Engine/Motor Adapter Mounting Plate Harrison Topper Light Duty Engine/Motor Adapter Mounting Plate

This Topper Plate Is Designed To Go Over Existing Engine Plate. Light Duty Steel Plate. Saves you the Trouble Of Grinding Your Old Plate Off.   5/64 Thick, .08. Exact Replacement for A Harrison Mini Bike.  Will Fit Standard Small Block Engines Footprint 3-7 Horsepower Engines.

Our Price: $15.00
MB200 Side Cover Plate Right Side MB200 Side Cover Plate Right Side

This Is The Right Side Cover Plate From The MB200.

Our Price: $15.00
MB200 Side Cover Plate Left Side MB200 Side Cover Plate Left Side

This Is The Left Side Cover Plate From The MB200.

Our Price: $15.00
Mounting bracket for Harrison Clutch Cover/Chainguard Mounting bracket for Harrison Clutch Cover/Chainguard

This Is The Mounting Bracket Used For The Heavy Duty Harrison Clutch Cover / Chain Guard. This is Heavy Gauge Steel. Includes Mounting Bolts

Our Price: $15.00
Economy Chrome Fender for 4" 5" & 6" Tires Economy Chrome Fender for 4" 5" & 6" Tires

FENDER, CHROME-PLATED STEEL, 14.5″ LENGTH, 3.75″ HEIGHT, MAXIMUM WIDTH – 4.2″ FOR 4″, 5″ & 6″ TIRES

Our Price: $17.99
AZUSA Engine/Motor Adapter Mounting Plate 8-3/4'' x 7-3/4'' with Lips AZUSA Engine/Motor Adapter Mounting Plate 8-3/4'' x 7-3/4'' with Lips

This is an Engine Mounting Plate, 8-3/4" x 7-3/4" with lips.

  • It is weldable steel component of one or more Azusa-design assemblies.

Our Price: $18.99
AZUSA Engine/Motor Adapter Mounting Plate, 5" X 12", Flat, Heavy 8199 AZUSA Engine/Motor Adapter Mounting Plate, 5" X 12", Flat, Heavy 8199

Engine Mounting Plate, 5" x 12", Flat, Heavy 9 Gauge Steel with slotted mounting holes.

Fits all popular Small Block engines 3HP-6.5HP

  • Fits Briggs & Stratton
  • Tecumseh, Honda
  • Honda Clone
  • Predator 212cc

Our Price: $18.99
Economy Chrome Fender for 8" & 10" Tires Deep drawn steel fenders Economy Chrome Fender for 8" & 10" Tires Deep drawn steel fenders

Economy Chrome Fender for 8" & 10" Tires Deep drawn steel fenders. Cold rolled steel.-Approximate Measurements-Overall Height: 4" Overall Length: 14-1/2" Overall Width: 4-3/8"Curved Length: 18-3/8"Inside Flat Width (Before curled sides): 3-1/2"

Our Price: $18.99
Non plated fender for 6" & 8" tires- wide Non plated fender for 6" & 8" tires- wide

Nonplated fender for 6" & 8" tires - wide Cold rolled steel.-Approximate Measurements-Overall Height: 5" Overall Length: 14-1/8" Overall Width: 6-1/8"Curved Length: 18-1/4"Inside Flat Width (Before curled sides): 5-1/4" ( This Is For The Wide Tires And Frames)

Our Price: $18.99
Storm 200 Fender Storm 200 Fender

Works As Both The Front And Rear Fenders For The TrailMaster Storm 200 Mini Bike.

Our Price: $19.95
Mini Bike Chain Guard Mini Bike Chain Guard

Will work with 5-7hp Predator, Honda clone, Tecumseh and Briggs & Stratton engines.
Check dimensions should work with most all mini-bikes.
Don't get your pants caught in the chain using our new, made in the USA chain guard.
  • 13" Long
  • 4.5" Wide
  • 3" Deep
  • Durable steel construction and very stylish, raw metal and paintable.

Our Price: $19.99
Ruttman Heavy Duty Engine/Motor Adapter Mounting Plate Ruttman Heavy Duty Engine/Motor Adapter Mounting Plate

Made To Exact Specs For Ruttman Mini Bike But Heavier Gauge Steel.

  • Fits Most Common Small Block Engine Footprint Found on 3-7 HP.
  • 9/64 Thick
  • 9/25 X 7 inches

Our Price: $20.00
Harrison Heavy Duty Motor/Engine Adapter Mounting Plate Harrison Heavy Duty Motor/Engine Adapter Mounting Plate

Heavy Duty Steel Engine Plate 11/64 Thick, .170. Exact Replacement for A Harrison Mini Bike. Thicker Plate For Performance Applications. Will Fit Standard Small Block Engines Footprint 3-7 Horsepower Engines.

Our Price: $20.00
Deluxe Aluminum Chain Guard/ Clutch Cover/ Clutch Guard Deluxe Aluminum Chain Guard/ Clutch Cover/ Clutch Guard

Deluxe Aluminum Chain Cover - Fits Predator 212cc / Honda Clone and more.
This Chain Cover fits most current engines 3hp-13hp+ and has two options for mounting holes.

Our Price: $21.99
Ruttman  Style Vintage Foot Pegs Pair ( Stainless Steel) Ruttman Style Vintage Foot Pegs Pair ( Stainless Steel)

Ruttmann Vintage Style Stainless Steel foot pegs. Can Be Polished To A Chrome like Shine Or powder Coated. Includes Mounting Hardware Screws. ( Also Fits Lil Indians and other similar Applications, Check Picture For visual Reference)  

Our Price: $21.99
Economy Chrome Fender for 6" & 8" Tires - Wide Economy Chrome Fender for 6" & 8" Tires - Wide

Economy Chrome Fender for 6" & 8" Tires - Wide Deep drawn steel fenders. Cold rolled steel.-Approximate Measurements-Overall Height: 5" Overall Length: 14-1/8" Overall Width: 6-1/8"Curved Length: 18-1/4"Inside Flat Width (Before curled sides): 5-1/4" ( This Is For The Wide Tires And Frames)

Our Price: $24.99
Ruttman  Style Vintage Extended Foot Pegs Pair ( Stainless Steel) Ruttman Style Vintage Extended Foot Pegs Pair ( Stainless Steel)

Ruttmann Vintage Style Extended Stainless Steel foot pegs. These Pegs Are A full Inch Longer then our Classic Ruttmann Foot Pegs And Give Greater Clearance When You Install Larger Motors And Still Maintain That Classic Look.  Can Be Polished To A Chrome like Shine Or powder Coated. Includes Mounting Hardware Screws. ( Also Fits Lil Indians and other similar Applications, Check Picture For visual Reference)  

Our Price: $24.99