Comet Bronze Bushing, 30 And 20 Series 3/4"
USA Made, Oil Impregnated Bronze idler bushing used on 20 and 30 series driver pulleys for a 3/4" diameter crankshaft. Great Upgrade For the Chinese Torque Converters. Best Bushing On the Market.
Measurements:
- 1 1/16" - ID
- 1 3/16 - OD
- 1/2" Wide
Insert Button for 20, 30 & Torq-A-Verter
Replacement push in retaining buttons used in 20 and 30 series torque converters on the driven pulley. Sold 3 to a pack. If you are replacing all six buttons order two packs.
For Part Replacement Numbers:
- Manco #6804
- 22575
- Comet #204332A
3/4 X 5/8 Crank Shaft Adapter
3/4 X 5/8 Crank Shaft Adapter. Used For Coleman Mini Bikes. Allows The Use of 3/4 Torque Converetr on 5/8 Shaft Applications
20/30 Series Fluorescent Yellow Garter Spring for Driver Unit
Two springs that wrap around the shoe driver assembly with fluorescent yellow tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by Comet.
- 216111A Fluorescent Yellow engage at 3300 RPM w/ Zinc Weights (stock)
- 216111A Fluorescent Yellow engage at 4200 RPM w/ Alum Die Cast
20/30 Series White Garter Spring for Driver Unit
Two springs that wrap around the shoe driver assembly with white tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by Comet.
- 011190A White Springs engage at 3100 RPM w/ Zinc Weights (stock)
- 011190A White Springs engage at 4000 RPM w/ Alum Die Cast
20/30 Series Blue/Silver Garter Spring for Driver Unit
Two springs that wrap around the shoe driver assembly with Blue/Silver tips. Used on 20 and 30 series driver clutches.
Comes with 2 springs. Made in the USA by Comet.
- 216111A Blue/Silver Springs engage at 3600 RPM w/ Zinc Weights (stock)
- 216111A Blue/Silver Springs engage at 4600 RPM w/ Alum Die Cast
Torque Converter Aluminum Die Cast Race weight assembly, 20/30 Series
Aluminum Die Cast Race weight assembly for the 20/30 Series Driver clutches from Comet. Go from your stock 320 gram weight assembly to this 146.8 gram aluminum die cast weight assembly. Garter Springs are sold separately. Will work well with 11188, 011190A, and 216111A garter springs.This Weight Will Provide Not Only Higher Stall But Will Increase Top End RPM.
6" 30 Series Comet Replacement Driven Pulley, 6" dia. 5/8 " bore
Highest Quality After market Driven Clutch. 30 series driven pulley, 6" diameter with 5/8" / 16mm bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Is Not made by Comet.
30 series 3/4" Bore comet Replacement Driver Unit
30 series driver, asymmetrical 3/4" bore, with 3/16" key. Highest Quality aftermarket not made by Comet.
Used to replace:
- Trailmaster #9.500.001
- Manco #5957
- American Sportworks # 14716
- Comet # 203814
- Comet # 219552
- Murray # 680167
- Murray # 1201404
- Yerf-Dog Q43201W
30 series 1" Bore comet Replacement Driver Unit
30 series driver, asymmetrical 1" bore, with 3/16" key. Highest Quality aftermarket not made by Comet.
NOTE: If you are using a 8hp or Higher Motor, We Strongly recommend upgrading to a 40 series setup. The 30 series will
only hold up on flat surface riding. ( no warranty if it does not hold up)
30 Series Comet Driven Clutch Pulley, 6" dia. 3/4" Bore
Original Made in USA by Comet. 30 series driven Clutch pulley, 6" diameter with 3/4" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting. Replaces Part# 217779A
List Price: $109.99
Our Price: $99.00
Sale Price: $73.99
Savings: $36.00
30 Series Comet Driven Clutch Pulley, 7" dia. 3/4" Bore
Original Made in USA by Comet. 30 series driven Clutch pulley, 7" diameter with 3/4" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting. Replaces Part# 217778A
List Price: $105.00
Our Price: $99.00
Sale Price: $84.99
Savings: $20.01
30 Series Comet Driven Clutch Pulley, 6" dia. 5/8" Bore
Original Made in USA by Comet. 30 series driven Clutch pulley, 6" diameter with 5/8" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting.
List Price: $105.00
Our Price: $99.99
Sale Price: $89.99
Savings: $15.01
30 Series Comet Driven Clutch Pulley, 7" dia. 5/8" Bore
Original Made in USA by Comet. 30 series driven Clutch pulley, 7" diameter with 5/8" bore. Used on Manco karts with 5hp-7hp engines. Most common belt used with this is Manco belt 5959 Or Comet 205389. This driven pulley is also used with comet Torq-a-verter kit with same belt. This Clutch is A Great Upgrade From the Chinese Stock Clutches. Better performance, Longer Lasting. Replaces Part# 217611A
List Price: $109.99
Our Price: $99.00
Sale Price: $89.99
Savings: $20.00
(Currently out of stock) Super 30 Series Driver - The Juggernaut
-THIS ITEM IS CURRENTLY OUT OF STOCK AND NOT AVAILABE- The
Juggernaut (340 Clone) is everything the original 30 series drivers
lacks under load. No longer do you have to sacrifice your engines
power or rpm capabilities! With this new Super 30 Series Driver, you
can take full advantage of a high HP high RPM small block engine
(196/212/225). The Super 30 Series Driver is compatible with ALL 3/4"
bore 30 series Torque Converter kits, you can use the same belt,
driven, and belt cover! This driver is recommended to be used with
higher rpm engines. On a stock motor running at 3600 rpm you will not
see much difference in performance, running 4000+ rpm is where
the Juggernaut shines.
-
No more slipping under load.
-
Has been tested up to 8500 rpm
Features
and Specs:
Bore:
3/4" (.750")
Key-way:
3/16"
3/4"
wide asymmetrical belt
Engagement:
2,500 RPM
RPM
Capabilities: 8,500+ RPM
All
new design with 3 rollers and 6 springs
No
adjustments needed
Limits/Eliminates
belt slippage
Improved
Reliability and Performance on high HP small block engines
Compatible
with all 30 series TAV kits with 3/4" bore (comet and
aftermarket)
Slightly
larger diameter then a regular 30 series driver but still works with
the same covers and belt
