Seal for VanK Rims
Wheel Seal for VanK Split Rims
- Metal Thickness: 0.10"
- Seal Thickness: 0.13"
VanK 6" Rim Halves
We recomend that you use the Seal for VanK Rims with this product.
Product Specs:
- 6" Van K Rim Halves
- These do not have a pre-drilled valve stem hole.
- Price is per Half...enter the number of halves you want in the quantity box
- NOTE: When using this rim with a rear wheel hub you maybe required to use the 5/16" bolt hole pattern, instead of the 1/4". This is due to the location of the pinch bolt on rear hubs, as it will interfere with bolts used to bolt the rim together when lining up with the 1/4" bolt pattern. However using the 5/16" bolt hole pattern provides the clearance for the pinch bolt. The rim currently only has 1/4" bolt holes pre-drilled, so the bolt holes used in conjunction with the wheel hub will need to be reamed out to 5/16".
VanK 5" Rim Halves
We recomend that you use the Seal for VanK Rims with this product.
Product Specs:
- 5" Van K Rim Halves
- These do not have a pre-drilled valve stem hole.
- Price is per Half...enter the number of halves you want in the quantity box
- NOTE: When using this rim with a rear wheel hub you maybe required to use the 5/16" bolt hole pattern, instead of the 1/4". This is due to the location of the pinch bolt on rear hubs, as it will interfere with bolts used to bolt the rim together when lining up with the 1/4" bolt pattern. However using the 5/16" bolt hole pattern provides the clearance for the pinch bolt. The rim currently only has 1/4" bolt holes pre-drilled, so the bolt holes used in conjunction with the wheel hub will need to be reamed out to 5/16".
VanK 4" Rim Halves
We recomend that you use the Seal for VanK Rims with this product.
Product Specs:
- 4" Van K Rim Halves
- These do not have a pre-drilled valve stem hole.
- Price is per Half...enter the number of halves you want in the quantity box
- NOTE: When using this rim with a rear wheel hub you maybe required to use the 5/16" bolt hole pattern, instead of the 1/4". This is due to the location of the pinch bolt on rear hubs, as it will interfere with bolts used to bolt the rim together when lining up with the 1/4" bolt pattern. However using the 5/16" bolt hole pattern provides the clearance for the pinch bolt. The rim currently only has 1/4" bolt holes pre-drilled, so the bolt holes used in conjunction with the wheel hub will need to be reamed out to 5/16".
6 Inch Wheel Mini Bike/Go Kart Wheel With Bearings
6 Inch Wheel Mini Bike/Go Kart Wheel With Bearings
- for 6" diameter wheels
- wheel width is 5 1/4" overall, 4 1/2" bead to bead inside wheel ( commonly used tires are 145/70-6, 13x5-6, 15x6-6) Tires can be ordered separate
- hub width is 2 3/4", NOTE- there is no offset. Hub sticks out 1" on both inside and outside from the wheel.
- hub accepts standard 1 3/8" Outside Diameter bearings. ( Common bearing is our 5090 precision bearing 5/8" ID)
- Includes 5/8 High speed bearings
6" Tri-Star Wheel, 3" Wide ( Aluminum )
The 6" Astro wheel has the nostalgic look of the Crager S/S wheel, it gives your mini-bike or gokart that old school look.
Wheel Width inside is 3", comes with a 5/8 high speed bearing
Mini Bike Drive Wheel 8" Disc For Trailmaster MB200
Rear 8" Disc Rim For Trailmaster MB200, Comes With 6202 Bearings.
- Hub width bearing to bearing - 7 9/16"
- Rim Width - 5 1/4"
- Flanged on both sides for sprocket and brake disc on other side.
- Most common tire size used with is rim is 19x7-8.
Our Price: $60.00
Sale Price: $55.00
Savings: $5.00
6" Astro Wheel 3 inch wide ( Aluminum )
The 6" Astro wheel has the nostalgic look of the Crager
S/S wheel, it gives your mini-bike or gokart that old school look. Inside width is 3' comes
with a 5/8 high speed bearing
