WildCat 58mm/2.283 Stroker Crankshaft

The 58mm Crankshaft is Stock in The WildCat 223 Engines And A Stroker For most Close And Predator Small Block Engines

Can Convert Any 212cc To A 223 Or any 223cc And Turn It Into 236cc. Just Needs One Of Our Matching Piston And Rod Combo.

the 58mm Crankshaft Is Made of Ductile Iron. Ductile Has The Ability To bend or Flex before Breaking. The Ductile iron Has Superior Shock Absorption And Higher Fatigue Strength Performance Over Lesser Cast Crankshafts. The 58mm or 2.283" Stroke Is A Great Way To Stroke Your Clone or Predator Without Spending A Fortune On Billet Crankshafts. the Crankpin And Journals Are hardened to Reduce Wear And Increase the Strength of The Crankshaft.

ARC Clone Rod Works With The Crankpins But May Require Clearance to Fit the Block And Not Interfere With The Crankshaft. Therefore this is Not A Drop-in Solution But Requires An Experienced Engine Builder To Assemble.

Compatibility
Crank Pin: Clone
Flywheel Taper: Clone

Engine Displacement Increase
- 196 Stock - 68 Bore X 58mm = 210.68cc
-212 Stock - 70 Bore X 58mm = 223.21cc
-225 Stock - 72Bore = 58mm = 236.15cc
-2.815 Or 71.5mm = 232.88cc